BBC IRON 049 Unshrouding Combustion Chambers for 2.250, 2.0
16.9 هزار بار بازدید -
9 سال پیش
-
www.headbytes.com 615-212-7168While the "049"
www.headbytes.com 615-212-7168
While the "049" BBC Iron Casting is UNSHROUDED for sure, it can always use some help when slamming a 2.250 or LARGER valve inside the head. I use a gasket from Fel-Pro's Basic OVERHAUL package, the "BLUE STRIP" with the 4.360 Bore Diameter (I do believe that is right, it MIGHT be 4.380, but I DONT think so) which will more than COVER a 454 bored .060 at 4.310. Hell, even at .120 Over (some of the "K" blocks get that done right off the bat IF it sonic's out right). at 4.370. This assures that the 2.250 valves DUMPS all it can right into the bore. This IS the easiest BBC Combustion chamber to make the 2.250 and larger valve to do its job...
While the "049" BBC Iron Casting is UNSHROUDED for sure, it can always use some help when slamming a 2.250 or LARGER valve inside the head. I use a gasket from Fel-Pro's Basic OVERHAUL package, the "BLUE STRIP" with the 4.360 Bore Diameter (I do believe that is right, it MIGHT be 4.380, but I DONT think so) which will more than COVER a 454 bored .060 at 4.310. Hell, even at .120 Over (some of the "K" blocks get that done right off the bat IF it sonic's out right). at 4.370. This assures that the 2.250 valves DUMPS all it can right into the bore. This IS the easiest BBC Combustion chamber to make the 2.250 and larger valve to do its job...
9 سال پیش
در تاریخ 1394/03/09 منتشر شده
است.
16,996
بـار بازدید شده