Picco P-Zero .85cc Rigger with Profi 1/2A Tuned Pipe Octura 0924
714 بار بازدید -
2 سال پیش
-
49,860 rpm at launch /
49,860 rpm at launch / loaded 39,722 rpm 38mph
30% nitro / 20% oil / fast out the gate with very high rpm on tap.
Octura 0930 cut down to 24mm "tweaked" for 1/2A power surface drive.
Load is low for the engine, can add in more pitch / cup, perfect as is for a TD .049
Proof of concept to show that small props can bite well at launch without
cavitating. 180g empty 196g fuel proofed less all gear / hardware.
All ply with sheet covered balsa core sponsons. All up weight check:
534.9g / 18.86oz dry weight and 555.6g / 19.59 oz with 2oz fuel.
Water cooled head. 165 deg. timing Profi .8cc tuned pipe / .062 wire drive.
Tub: 20.5in L x 2.5in W
Sponson max width: 16.5in
Ride pads .98in wide
2 سال پیش
در تاریخ 1401/01/10 منتشر شده
است.
714
بـار بازدید شده