F-100 5 Speed Swap: Low Buck Style - Simple Parts List & Walk-Through

Cheap & Reliable !!!
Parts List Rough Draft Below with Links !!!
---------------------------------------------------------------------
Old School 289/302/351 Swap Parts (28oz Flywheel & Block Cast Clutch Pivot)
- 86 to 93 Mustang T5 w/ yoke (preferably from a GT)
- Old Bellhousing to T5 adapter plate
Part Number for Adapter: https://www.summitracing.com/parts/sd...
- floor cut/clearance with bucket seats
- Custom driveshaft (made by driveshaft shop)
- Move trans cross-member & shim trans up with washers or plates
- low gear rear end such as 4.11 on 31's
-

86-00 Modern Roller 5.0  (50oz flywheel & NO clutch pivot casting)
- Everything listed above +
- Clutch Pivot engine side & frame pivot shims
- late 80s f150 manual flywheel 11 inch 164 tooth(oreileys or rock auto)
- 68 240 inline finger clutch 10 inch or early 80s mustang clutch
- z bar motor side pivot link -
https://www.summitracing.com/parts/sd...

• #autos_vehicles
• #f100_5_speed_swap
• #5_speed_swap_f100
• #t5_swap_f100