M660 DIG-R-MOBILE, Towable Hole Digger, Safety and Operational Information
57.1 هزار بار بازدید -
15 سال پیش
-
One man operation, single axle
One man operation, single axle towable configuration with the following standard features:
a) High speed, 4.80 x 12 tires and wheels with separate hubs.
b) Towbar complete with quick attach pins, safety tow chains and 1-7/8 to 2 inch diameter
Croft® type adjustable ball hitch coupler.
c) Eight GPM hydraulic pump with third return line to reservoir for pump protection, 5 US gallon
capacity oil reservoir with integral suction strainer, 10 micron return line filter and vandal
resistant, lockable oil level dipstick.
d) Low speed, high torque hydraulic motor, 144 RPM no load rotation speed, 276 ft lbs
maximum drilling torque @ 2000 PSI hydraulic system pressure.
e) Exclusive Snap-Lok™ Auger Storage System to ease maneuvering on the job site.
f) Hydraulic control valve with spring return (forward or reverse auger direction) operator control
lever.
g) Remote engine ignition ON/OFF switch.
h) Hydraulic Tool Manufacturers Association (HTMA) type, flush mount/no drip, quick hose
couplers to facilitate the use of popular types of hydraulic tools designed to operate on the
standard HTMA Class II flow (8 GPM flow rate and @ 2000 PSI hydraulic system pressure).
i) Maximum Drilling Torque 276 ft.lbs. @2000PSI.
a) High speed, 4.80 x 12 tires and wheels with separate hubs.
b) Towbar complete with quick attach pins, safety tow chains and 1-7/8 to 2 inch diameter
Croft® type adjustable ball hitch coupler.
c) Eight GPM hydraulic pump with third return line to reservoir for pump protection, 5 US gallon
capacity oil reservoir with integral suction strainer, 10 micron return line filter and vandal
resistant, lockable oil level dipstick.
d) Low speed, high torque hydraulic motor, 144 RPM no load rotation speed, 276 ft lbs
maximum drilling torque @ 2000 PSI hydraulic system pressure.
e) Exclusive Snap-Lok™ Auger Storage System to ease maneuvering on the job site.
f) Hydraulic control valve with spring return (forward or reverse auger direction) operator control
lever.
g) Remote engine ignition ON/OFF switch.
h) Hydraulic Tool Manufacturers Association (HTMA) type, flush mount/no drip, quick hose
couplers to facilitate the use of popular types of hydraulic tools designed to operate on the
standard HTMA Class II flow (8 GPM flow rate and @ 2000 PSI hydraulic system pressure).
i) Maximum Drilling Torque 276 ft.lbs. @2000PSI.
15 سال پیش
در تاریخ 1388/03/13 منتشر شده
است.
57,116
بـار بازدید شده