How to fix an ABS warning light in a Chev/GM
597.7 هزار بار بازدید -
6 سال پیش
-
This video is an amateur
This video is an amateur demonstration of how I approached an intermittent ABS warning light on the instrument panel of a 2000 Chev Suburban. A diagnostic approach is described, removal of the Electronic Brake Control Module is shown, and I demonstrate reflowing of solder joints on the EBCM circuit board.
This video is published for entertainment purposes with no guarantee as to accuracy or safety. This warning light may be there for other reasons so although this is a common diagnosis it is not the only cause for that trouble light. Always seek out multiple sources of information before you decide to accept the risk of DIY repair. Any misadventure you encounter if you decide to attempt your own repair is at your own risk.
This video is published for entertainment purposes with no guarantee as to accuracy or safety. This warning light may be there for other reasons so although this is a common diagnosis it is not the only cause for that trouble light. Always seek out multiple sources of information before you decide to accept the risk of DIY repair. Any misadventure you encounter if you decide to attempt your own repair is at your own risk.
6 سال پیش
در تاریخ 1397/01/08 منتشر شده
است.
597,736
بـار بازدید شده