PETREL (EP1) - Well Completions (Well path design & Completion design)
420 بار بازدید -
9 ماه پیش
-
Here are the main points
Here are the main points I include in the video;
PART 1
Lesson 1(a) : Import well data - Well header & well path deviation
Lesson 1(b) : Import well path/ deviation file - Trajectories
Note 1 : Difference (before and after) - Imported all well files and make folder
Lesson 2 : Plan a new well - Using geological target & well plan designer
Note 2 : Create filter - Zone of interest
Step 1 : Create a drilling or target point - Tool palette of digitizing well
Step 2 : Insert new well plan - Well plan designer
Note 3 : Create synthetic logs - Porosity & oil saturation (SOIL)
Note 4 : Create saved searches - Organizing wells in a folder
Lesson 3 : Create well intersection - With horizon reports
PART 2
Lesson 4 : Create completion item - Using Completions manager
Lesson 5 : Insert casing - Using Manual design (Tool palette)
Lesson 6 : Edit casing - Using Manual design (Well section window)
Lesson 7 : Add perforation - Using Manual design (Tool palette)
Lesson 8 : Add another perforation - Relative to the well tops
Lesson 9 : Import well events - Completions data
Lesson 10 : Perforate a well - Automated well completions design
PART 1
Lesson 1(a) : Import well data - Well header & well path deviation
Lesson 1(b) : Import well path/ deviation file - Trajectories
Note 1 : Difference (before and after) - Imported all well files and make folder
Lesson 2 : Plan a new well - Using geological target & well plan designer
Note 2 : Create filter - Zone of interest
Step 1 : Create a drilling or target point - Tool palette of digitizing well
Step 2 : Insert new well plan - Well plan designer
Note 3 : Create synthetic logs - Porosity & oil saturation (SOIL)
Note 4 : Create saved searches - Organizing wells in a folder
Lesson 3 : Create well intersection - With horizon reports
PART 2
Lesson 4 : Create completion item - Using Completions manager
Lesson 5 : Insert casing - Using Manual design (Tool palette)
Lesson 6 : Edit casing - Using Manual design (Well section window)
Lesson 7 : Add perforation - Using Manual design (Tool palette)
Lesson 8 : Add another perforation - Relative to the well tops
Lesson 9 : Import well events - Completions data
Lesson 10 : Perforate a well - Automated well completions design
9 ماه پیش
در تاریخ 1402/07/18 منتشر شده
است.
420
بـار بازدید شده