BMW how to repair foot-well module or lighting module, FRM FRM3, using xProg (or similar)
170.1 هزار بار بازدید -
4 سال پیش
-
Video showing how to repair
Video showing how to repair your existing module rather than purchase a new one for thousands. This method doesn't require you to reprogram the functionality as it is extracted from your existing setup.
You need to repair this if you are having problems doing a diagnostic test, mirrors, windows, central locking, reverse gear, high beams etc are not functioning correctly.
Microprocessor: Freescale MC9S12XEQ384 3M2J
Steps:
1) Solder the wires according to diagram in video using correct adaptor
2) Download the D-Flash from board
3) Convert D-Flash to EEEProm (http://tlvps.tomvanleeuwen.nl/frm) [Offline and online versions available]
4) Erase existing (corrupt) EEEProm on FRM3 (16 Sectors)
5) Write converted EEEProm
6) Verify(Check written file is same as saved file)
7) Test on car
You need to repair this if you are having problems doing a diagnostic test, mirrors, windows, central locking, reverse gear, high beams etc are not functioning correctly.
Microprocessor: Freescale MC9S12XEQ384 3M2J
Steps:
1) Solder the wires according to diagram in video using correct adaptor
2) Download the D-Flash from board
3) Convert D-Flash to EEEProm (http://tlvps.tomvanleeuwen.nl/frm) [Offline and online versions available]
4) Erase existing (corrupt) EEEProm on FRM3 (16 Sectors)
5) Write converted EEEProm
6) Verify(Check written file is same as saved file)
7) Test on car
4 سال پیش
در تاریخ 1398/11/24 منتشر شده
است.
170,189
بـار بازدید شده