Replace ISP ONT/ONU - HSGQ SFP XPON ONU Stick
25.2 هزار بار بازدید -
11 ماه پیش
-
In this video, we will
In this video, we will take a look at the the XPON ONU Stick from HSGQ. The video will walk you through the Web Interface of the XPON ONU Stick and the process of replacing the ISP provided ONT/ONU with this SFP XPON module. (XPON means the SFP supports both GPON and EPON)
In this setup, the HSGQ is connected to the 2.5G Media Converter. The RJ45 port of the Media Converter is connected to the WAN port of the Nano Pi R6S.
If this is your first attempt replacing the ISP provided device, you can check out the below videos for more information:
What is OLT & ONT/ONU - Hisense GPON LTE3415 Replace ISP ONT/ONU with PON Stick (S...
LEOX LXT-010S-H SFP GPON Module Replace ISP ONT/ONU - LEOX LXT-010S-H...
NOKIA GPON SFP G-010S-A Replace ISP ONT/ONU - NOKIA GPON SFP ...
Ubiquiti UFiber LOCO Replace ISP ONT/ONU - Ubiquiti UFiber...
Besides the Web Interface, you can also configure the SFP module via Telnet. The commands are the same with other Realtek GPON SFP, such as the ODI DFP-34G-2C2 and the LEOX LXT-010S-H.
Video timeframe:
00:00 - Intro
00:29 - A short history of ODI/HSGQ SFP PON Stick
01:06 - Overview of the HSGQ SFP XPON ONU Stick
01:54 - Getting Started - Connecting the Hardware
02:21 - Access the HSGQ SFP XPON Web Interface
04:04 - The PON Tab - XPON (GPON/EPON status)
04:46 - The PON Settings (where you configure most of the thing)
06:18 - MAC & MACKEY (must see)
07:13 - VLAN Setting (Auto/Manual Transparent or PVID)
07:53 - Clone the OMCI value from the ISP provided ONT
09:02 - Check the PON Authenticate Status (O5 = good to go)
09:28 - Set up PPPoE on the NanoPi R6S
12:08 - Some Speedtests
13:53 - More about the VLAN tagging on the XPON SFP Module
Special thanks to Đông Vũ for lending me the HSGQ XPON SFP module.
Thank you for watching and see you in the next video!
In this setup, the HSGQ is connected to the 2.5G Media Converter. The RJ45 port of the Media Converter is connected to the WAN port of the Nano Pi R6S.
If this is your first attempt replacing the ISP provided device, you can check out the below videos for more information:
What is OLT & ONT/ONU - Hisense GPON LTE3415 Replace ISP ONT/ONU with PON Stick (S...
LEOX LXT-010S-H SFP GPON Module Replace ISP ONT/ONU - LEOX LXT-010S-H...
NOKIA GPON SFP G-010S-A Replace ISP ONT/ONU - NOKIA GPON SFP ...
Ubiquiti UFiber LOCO Replace ISP ONT/ONU - Ubiquiti UFiber...
Besides the Web Interface, you can also configure the SFP module via Telnet. The commands are the same with other Realtek GPON SFP, such as the ODI DFP-34G-2C2 and the LEOX LXT-010S-H.
Video timeframe:
00:00 - Intro
00:29 - A short history of ODI/HSGQ SFP PON Stick
01:06 - Overview of the HSGQ SFP XPON ONU Stick
01:54 - Getting Started - Connecting the Hardware
02:21 - Access the HSGQ SFP XPON Web Interface
04:04 - The PON Tab - XPON (GPON/EPON status)
04:46 - The PON Settings (where you configure most of the thing)
06:18 - MAC & MACKEY (must see)
07:13 - VLAN Setting (Auto/Manual Transparent or PVID)
07:53 - Clone the OMCI value from the ISP provided ONT
09:02 - Check the PON Authenticate Status (O5 = good to go)
09:28 - Set up PPPoE on the NanoPi R6S
12:08 - Some Speedtests
13:53 - More about the VLAN tagging on the XPON SFP Module
Special thanks to Đông Vũ for lending me the HSGQ XPON SFP module.
Thank you for watching and see you in the next video!
11 ماه پیش
در تاریخ 1402/08/07 منتشر شده
است.
25,258
بـار بازدید شده