FORD 1980-1992 Ignition switch, lock cylinder, rack, pinion and actuator rod repair
315.4 هزار بار بازدید -
7 سال پیش
-
Ignition lock cylinder, rack, pinion
Ignition lock cylinder, rack, pinion and actuator rod replacement. This procedure fixes 1980 - 1992 FORD F150-F350 trucks and E150-E350 vans with tilt steering.
For more help
https://www.thejunkmanadv.com/the-jun...
Ford OEM part numbers D4AZ-3E717-A is the BRASS GEAR. Ford OEM p/n D1AZ-3E723-C is the RACK (upper actuator) The lower actuator part can be bought from Dorman Products 83280.
Ford OEM E9T2-3E715-B. The lower actuator is the common part that fails. It breaks on the square part from excess force and age of turning the key also trying to shift the gear lever when the ignition is off or trying to start when the shifter is in gear. Common symptoms are: no starter engagement even when the key is turned all the way in the start position, Key is hard to turn for no apparent reason, The positions in the lock cylinder seem vague or hitting a bump will rock the cylinder enough to turn the key into "off".
Outtake video (funny) FORD ignition actuator rod, rack, pin...
Check out the website for more https://www.thejunkmanadv.com
Update:
Here is a good forum post from a user that has great pictures. It might help.
https://www.fullsizebronco.com/thread...
0:00 - Intro
0:09 - Diagnosis of the ignition problem
1:30 - Removing the steering wheel
1:57 - Using a steering wheel puller
2:33 - Lock cylinder removal
2:46 - Turn signal clock ring & housing removal
3:33 - Ignition actuator rod location
3:55 - Rack & pinion gear inspection
5:14 - Installing the ignition rack & pinion gear
#ignitionswitch #replacement #ford
For more help
https://www.thejunkmanadv.com/the-jun...
Ford OEM part numbers D4AZ-3E717-A is the BRASS GEAR. Ford OEM p/n D1AZ-3E723-C is the RACK (upper actuator) The lower actuator part can be bought from Dorman Products 83280.
Ford OEM E9T2-3E715-B. The lower actuator is the common part that fails. It breaks on the square part from excess force and age of turning the key also trying to shift the gear lever when the ignition is off or trying to start when the shifter is in gear. Common symptoms are: no starter engagement even when the key is turned all the way in the start position, Key is hard to turn for no apparent reason, The positions in the lock cylinder seem vague or hitting a bump will rock the cylinder enough to turn the key into "off".
Outtake video (funny) FORD ignition actuator rod, rack, pin...
Check out the website for more https://www.thejunkmanadv.com
Update:
Here is a good forum post from a user that has great pictures. It might help.
https://www.fullsizebronco.com/thread...
0:00 - Intro
0:09 - Diagnosis of the ignition problem
1:30 - Removing the steering wheel
1:57 - Using a steering wheel puller
2:33 - Lock cylinder removal
2:46 - Turn signal clock ring & housing removal
3:33 - Ignition actuator rod location
3:55 - Rack & pinion gear inspection
5:14 - Installing the ignition rack & pinion gear
#ignitionswitch #replacement #ford
7 سال پیش
در تاریخ 1396/01/29 منتشر شده
است.
315,437
بـار بازدید شده