Star Wars: Make the Skywalker Lightsaber for $25 with sounds, clashes, and lights Part 1
121.2 هزار بار بازدید -
7 سال پیش
-
If you want to construct
If you want to construct your own Skywalker lightsaber used by Anakin, Luke, Finn, and Rey for around $25 this is the best video to watch. This tutorial breaks the build down into easy to follow steps and talks about design trade-offs when making this legendary replica including light and sound. As with all my builds I attempt to use simple techniques and easy to find materials.
You might also be interested in my Darth Vader lightsaber here: How to Make Darth Vader's Hero Lights...
If you like this video, make sure to checkout Part 2 and the Blade build available here: Star Wars: How to Make the Skywalker ... watch
v=jfPhNqQhPHQ
#starwars #lightsaber #theriseofskywalker
Here's the parts list for this build:
Plumbing pipe 11/2" X 12" (chrome plated brass)
Rubber car floor mat
kid's $3 generic light saber (found at Walmart, 5 and Below)
D-ring (made out of 9 gauge wire, thinner wire will also work)
1" diameter metal ring (mine came from an old lamp post)
2 one-inch slices of Aluminum L 1"X 1/16"
2 RG 6 connectors (found part)
2 old RCA connectors with gold ends (found part)
1- 1" Sharktube/PEX pipe coupler (to receive lightsaber blade)
5 #6 1/2" bolts and nuts
6 rivets 3mm X 6mm or you could use Phillips head screws
red push button switch or 9mm dowel with red paint
Legos or you could use a 3/4" square dowel ~1.9 inches long
scrap wooden painter's stirrers
aluminum HVAC tape
1 hose clamp 12mm thick and at least 49mm or1.9" long
1 1/2 pvc coupler
1 10mm clear bumper
1 LED flashlight www.amazon.com/gp/product/B00CEOII9K
1 snap in sink hole cover
11/4" long piece of 1" Schedule 20 PVC pipe (thinner than sched 40)
1 3/16 toggle bolt
black spray paint
glue (my prferences are: DAP rapid fuse and E6000)
tools needed:
drill, drill bits
coping saw
hack saw (optional)
hand riveter (optional)
step drills (optional but very helpful)
pliers
screwdirver
files
bench vice (optional but very helpful)
You might also be interested in my Darth Vader lightsaber here: How to Make Darth Vader's Hero Lights...
If you like this video, make sure to checkout Part 2 and the Blade build available here: Star Wars: How to Make the Skywalker ... watch
v=jfPhNqQhPHQ
#starwars #lightsaber #theriseofskywalker
Here's the parts list for this build:
Plumbing pipe 11/2" X 12" (chrome plated brass)
Rubber car floor mat
kid's $3 generic light saber (found at Walmart, 5 and Below)
D-ring (made out of 9 gauge wire, thinner wire will also work)
1" diameter metal ring (mine came from an old lamp post)
2 one-inch slices of Aluminum L 1"X 1/16"
2 RG 6 connectors (found part)
2 old RCA connectors with gold ends (found part)
1- 1" Sharktube/PEX pipe coupler (to receive lightsaber blade)
5 #6 1/2" bolts and nuts
6 rivets 3mm X 6mm or you could use Phillips head screws
red push button switch or 9mm dowel with red paint
Legos or you could use a 3/4" square dowel ~1.9 inches long
scrap wooden painter's stirrers
aluminum HVAC tape
1 hose clamp 12mm thick and at least 49mm or1.9" long
1 1/2 pvc coupler
1 10mm clear bumper
1 LED flashlight www.amazon.com/gp/product/B00CEOII9K
1 snap in sink hole cover
11/4" long piece of 1" Schedule 20 PVC pipe (thinner than sched 40)
1 3/16 toggle bolt
black spray paint
glue (my prferences are: DAP rapid fuse and E6000)
tools needed:
drill, drill bits
coping saw
hack saw (optional)
hand riveter (optional)
step drills (optional but very helpful)
pliers
screwdirver
files
bench vice (optional but very helpful)
7 سال پیش
در تاریخ 1396/08/30 منتشر شده
است.
121,298
بـار بازدید شده