How to Replace Exhaust Manifold Catalytic Converter Assembly 2000-2007 Ford Focus
4.7 هزار بار بازدید -
6 ماه پیش
-
Shop for New Auto Parts
Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/93/bp/direct-fit-cat...
This video shows you how to install a new TRQ direct-fit bolt up catalytic converter assembly on your 2000-2007 Ford Focus. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• 13mm Wrench http://1aau.to/oaa4/1AXAA00010
• 10mm Socket http://1aau.to/obDG/1AXAA00017
• 13mm Socket http://1aau.to/ob3p/1AXAA00015
• 15mm Socket http://1aau.to/ob3p/1AXAA00015
• 22mm Socket http://1aau.to/orL/1AXAA00266
• 7mm Socket http://1aau.to/obDG/1AXAA00017
• 8mm Socket http://1aau.to/obDG/1AXAA00017
• Trim Tool Set http://1aau.to/oauD/1AXXX00006
• Needle nose pliers http://1aau.to/oIz/1AXAA00051
• Needle nose pliers http://1aau.to/oIz/1AXAA00052
• Pliers
• E8 Inverted Torx Socket
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet http://1aau.to/obDG/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/ob3p/1AXAA00015
• Torque Wrench http://1aau.to/oa74/1AXAA00044
• Gloves http://1aau.to/oaW3/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oauz/1AXAA00068
• Jack Stands http://1aau.to/oagC/1AXAA00065
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: @trq
Check out our playlist:
Ford Focus 1st Generation 2000-2007: Ford Focus 1st Generation 2000-2007
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
This video shows you how to install a new TRQ direct-fit bolt up catalytic converter assembly on your 2000-2007 Ford Focus. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• 13mm Wrench http://1aau.to/oaa4/1AXAA00010
• 10mm Socket http://1aau.to/obDG/1AXAA00017
• 13mm Socket http://1aau.to/ob3p/1AXAA00015
• 15mm Socket http://1aau.to/ob3p/1AXAA00015
• 22mm Socket http://1aau.to/orL/1AXAA00266
• 7mm Socket http://1aau.to/obDG/1AXAA00017
• 8mm Socket http://1aau.to/obDG/1AXAA00017
• Trim Tool Set http://1aau.to/oauD/1AXXX00006
• Needle nose pliers http://1aau.to/oIz/1AXAA00051
• Needle nose pliers http://1aau.to/oIz/1AXAA00052
• Pliers
• E8 Inverted Torx Socket
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet http://1aau.to/obDG/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/ob3p/1AXAA00015
• Torque Wrench http://1aau.to/oa74/1AXAA00044
• Gloves http://1aau.to/oaW3/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oauz/1AXAA00068
• Jack Stands http://1aau.to/oagC/1AXAA00065
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: @trq
Check out our playlist:
Ford Focus 1st Generation 2000-2007: Ford Focus 1st Generation 2000-2007
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
6 ماه پیش
در تاریخ 1402/12/29 منتشر شده
است.
4,778
بـار بازدید شده