How to use silicone screen printing on the Shoe upper?
661 بار بازدید -
3 ماه پیش
-
How to use silicone screen
How to use silicone screen printing on the Shoe upper?
Preparation:
1.Mesh&Squeegee:80-120(32T-48T) mesh number;65-75 degree squeegee.
2.Pigment:XG-serise pigment mixing ratio 10%.
3.Fast dry catalyst XG-866B-2 for Crossing linker mixing ratio 10%,for transfer silicone XG-866A-2Y mixing ratio 2-3%.
4.Thinner XG-128AH mixing ratio 10%.
5.Table drying temp 120℃-130℃ for 5-6 seconds
6.Baking at 80℃ for 30 minutes.
Process:
Step1:Crossing linker under print 1-2 layers.
Crossing linker XG-360Z-3X 50G
Fast dry catalyst XG-866B-2 5G
Step2:Round silicone thickening print 15-20 layers
Round silicone XG-866A-2Y 100G
Fast dry catalyst XG-866B-2 2-3G
Thinner XG-128AH 10G
Step3:Florescent orange pigment print 3 layers
Round silicone XG-866A-2Y 50G
Fast dry catalyst XG-866B-2 1-1.5G
Pigment XG-serise 5G
Thinner XG-128AH 5G
Step4:Florescent blue pigment print 1 layers
Round silicone XG-866A-2Y 50G
Fast dry catalyst XG-866B-2 1-1.5G
Pigment XG-serise 5G
Thinner XG-128AH 5G
Step5:Florescent purple pigment print 3-4 layers
Round silicone XG-866A-2Y 50G
Fast dry catalyst XG-866B-2 1-1.5G
Pigment XG-serise 5G
Thinner XG-128AH 5G
Step6:Top print
1)Glossy silicone print 3-4 layers
Glossy silicone XG-399-3 50G
Fast dry catalyst XG-866B-2 1-1.5G
2)Matte silicone print 1-2 layers
Matte silicone XG-866M-6+ 50G
Fast dry catalyst XG-866B-2 1-1.5G
Step7:Baking at 80℃for 30 minutes.
For more silicone ink information kindly follow our website :www.xgsilicone.com or contact with Lily :+86 13825488489 whatsapp&wechat the same number
Preparation:
1.Mesh&Squeegee:80-120(32T-48T) mesh number;65-75 degree squeegee.
2.Pigment:XG-serise pigment mixing ratio 10%.
3.Fast dry catalyst XG-866B-2 for Crossing linker mixing ratio 10%,for transfer silicone XG-866A-2Y mixing ratio 2-3%.
4.Thinner XG-128AH mixing ratio 10%.
5.Table drying temp 120℃-130℃ for 5-6 seconds
6.Baking at 80℃ for 30 minutes.
Process:
Step1:Crossing linker under print 1-2 layers.
Crossing linker XG-360Z-3X 50G
Fast dry catalyst XG-866B-2 5G
Step2:Round silicone thickening print 15-20 layers
Round silicone XG-866A-2Y 100G
Fast dry catalyst XG-866B-2 2-3G
Thinner XG-128AH 10G
Step3:Florescent orange pigment print 3 layers
Round silicone XG-866A-2Y 50G
Fast dry catalyst XG-866B-2 1-1.5G
Pigment XG-serise 5G
Thinner XG-128AH 5G
Step4:Florescent blue pigment print 1 layers
Round silicone XG-866A-2Y 50G
Fast dry catalyst XG-866B-2 1-1.5G
Pigment XG-serise 5G
Thinner XG-128AH 5G
Step5:Florescent purple pigment print 3-4 layers
Round silicone XG-866A-2Y 50G
Fast dry catalyst XG-866B-2 1-1.5G
Pigment XG-serise 5G
Thinner XG-128AH 5G
Step6:Top print
1)Glossy silicone print 3-4 layers
Glossy silicone XG-399-3 50G
Fast dry catalyst XG-866B-2 1-1.5G
2)Matte silicone print 1-2 layers
Matte silicone XG-866M-6+ 50G
Fast dry catalyst XG-866B-2 1-1.5G
Step7:Baking at 80℃for 30 minutes.
For more silicone ink information kindly follow our website :www.xgsilicone.com or contact with Lily :+86 13825488489 whatsapp&wechat the same number
3 ماه پیش
در تاریخ 1403/03/19 منتشر شده
است.
661
بـار بازدید شده