How to Replace Rear Axle Seal 1994-2004 Chevrolet S10
9.4 هزار بار بازدید -
2 سال پیش
-
For More Info visit us
For More Info visit us at: http://1aau.to/h/dqU/
This video shows you how to install a rear axle seal on your 1994-2004 Chevy S-10. Whether you needed to replace a solid rear axle bearing, or the seal was leaking, you'll need to replace the rear axle seal.
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 13mm Socket http://1aau.to/od/1AXAA00015
• Bearing Puller
• 3/8 Inch Socket http://1aau.to/oa/1AXAA00016
• 1/2 Inch Ratchet http://1aau.to/ob/1AXAA00043
• 1/4 Inch Ratchet http://1aau.to/od/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/od/1AXAA00015
• Torque Wrench http://1aau.to/od/1AXAA00044
• Bearing Grease
• Gear Oil
• Gloves http://1aau.to/ob/1AXSS00048
• Liquid Thread Locker
• RTV
• Safety Glasses http://1aau.to/ob/1AXAA00343
• 5/16 Inch Allen Wrench http://1aau.to/ob/1AXAA00006
• Drain Pan http://1aau.to/od/1AXAA00320
• Grinder
• Hammer http://1aau.to/ob/1AXAA00091
• Razor Blade / Gasket Scraper http://1aau.to/oa/1AXAA00280
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
This video shows you how to install a rear axle seal on your 1994-2004 Chevy S-10. Whether you needed to replace a solid rear axle bearing, or the seal was leaking, you'll need to replace the rear axle seal.
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 13mm Socket http://1aau.to/od/1AXAA00015
• Bearing Puller
• 3/8 Inch Socket http://1aau.to/oa/1AXAA00016
• 1/2 Inch Ratchet http://1aau.to/ob/1AXAA00043
• 1/4 Inch Ratchet http://1aau.to/od/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/od/1AXAA00015
• Torque Wrench http://1aau.to/od/1AXAA00044
• Bearing Grease
• Gear Oil
• Gloves http://1aau.to/ob/1AXSS00048
• Liquid Thread Locker
• RTV
• Safety Glasses http://1aau.to/ob/1AXAA00343
• 5/16 Inch Allen Wrench http://1aau.to/ob/1AXAA00006
• Drain Pan http://1aau.to/od/1AXAA00320
• Grinder
• Hammer http://1aau.to/ob/1AXAA00091
• Razor Blade / Gasket Scraper http://1aau.to/oa/1AXAA00280
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1401/04/03 منتشر شده
است.
9,422
بـار بازدید شده