How to mount a cutting disc onto an angle grinder correctly
193.9 هزار بار بازدید -
3 سال پیش
-
In this video, we show
In this video, we show you how to correctly mount a cutting disc onto an angle grinder. This might seem obvious, but the incorrect mounting is common and can result in serious injury.
Start by ensuring the grinder is unplugged. Use the flange that goes with the machine and ensure it's clean with no burrs or damage. For flat cutting discs, mount the flange with the flat side towards the wheel. Use the key or wrench to fix tightly to the grinder. Once the wheel is in place, it should not move or rotate. Take care not to over tighten the flange, this might damage the disc and make it hard to remove the stub when you're finished.
For grinding discs, ensure the raised hub of the flange faces into the arborhole of the wheel, then fix the wheel tightly to the machine, again being sure not to over tighten.
Esure you have the correct guard on your angle grinder to ensure a safe working practice.
Norton offers a range of cutting and grinding discs for all metal fabrication jobs. For more information and expert help and advice, don't hesitate to contact us at https://www.nortonabrasives.com/en-gb or contact your local distributor to find a Norton product to help you optimise your process.
If you liked this video give it a thumbs up and if you want to see more, check out the Metal Fabrication playlist. To keep up to date with all Norton videos, hit 'subscribe' and turn on post notifications to be first to see all our new videos!
Start by ensuring the grinder is unplugged. Use the flange that goes with the machine and ensure it's clean with no burrs or damage. For flat cutting discs, mount the flange with the flat side towards the wheel. Use the key or wrench to fix tightly to the grinder. Once the wheel is in place, it should not move or rotate. Take care not to over tighten the flange, this might damage the disc and make it hard to remove the stub when you're finished.
For grinding discs, ensure the raised hub of the flange faces into the arborhole of the wheel, then fix the wheel tightly to the machine, again being sure not to over tighten.
Esure you have the correct guard on your angle grinder to ensure a safe working practice.
Norton offers a range of cutting and grinding discs for all metal fabrication jobs. For more information and expert help and advice, don't hesitate to contact us at https://www.nortonabrasives.com/en-gb or contact your local distributor to find a Norton product to help you optimise your process.
If you liked this video give it a thumbs up and if you want to see more, check out the Metal Fabrication playlist. To keep up to date with all Norton videos, hit 'subscribe' and turn on post notifications to be first to see all our new videos!
3 سال پیش
در تاریخ 1399/12/07 منتشر شده
است.
193,938
بـار بازدید شده