FLSUN S1: What You Need to Know, an In-Depth Review

Clough42
Clough42
48.9 هزار بار بازدید - 3 هفته پیش - Today we're taking a look
Today we're taking a look at the new FLSUN S1 high-speed delta 3D printer.  They say it's fast, and it really is fast.  But is it good?  I have some opinions.

*This site contains affiliate links for which I may be compensated
FLSun S1: https://bit.ly/3zEyIJT

Other stuff mentioned in the video:
Bambu Lab X1-Carbon: https://bit.ly/3XzuET9
Bambu Lab X1-Carbon Combo: https://bit.ly/3JzYQaX
Bambu Lab P1S Printer: https://bit.ly/3OYgcjT
Bambu Lab Filaments: https://bit.ly/3pusOqd

Support Clough42 on Patreon: Patreon: clough42

Raw Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b...

00:00 I really wanted to review this printer    
00:16 What is it?    
00:56 It's SO FAST    
02:32 It's SO BIG    
03:31 Adequate software    
04:41 You'll need to tune it    
06:10 The Z-height blues    
08:28 Almost the right size    
09:20 Not a lot of flow for a printer this young    
11:22 Printing stuff other than PLA    
13:00 What?  I can't hear you!    
14:09 It's bigger on the inside    
14:58 Everyone must have AI, for some reason    
16:50 I did actually print some things    
21:36 But what about the Bambu?    
23:22 What FLSun needs to do    
24:43 Do you want one?
3 هفته پیش در تاریخ 1403/04/16 منتشر شده است.
48,977 بـار بازدید شده
... بیشتر