Bmw 335i N54 INJECTOR Replacement Ultimate DIY Guide (Includes Coding ProTool!)
24.4 هزار بار بازدید -
4 سال پیش
-
I've replaced many injectors during
I've replaced many injectors during my ownership of an N54 vehicle. Here is my guide on how to easily change your injectors! The job is not bad at all as long as you have all the proper tools. I finally got a set of Index 12's for my personal car so hopefully I will not have to swap anymore. Here is me taking the index 12's out of the donor vehicle and putting in my old index 8's (they were working fine).
Injector Seal Replacement:
N54 N63 S63 Fuel Injector Seal Replac...
What you'll need:
- E10 torx socket (Injector Brace)
- 14mm open end wrench (Fuel Lines)
- Precision Raceworks N54 Injector Tool or equivalent
- 8mm socket (cowl) and 5mm hex (engine cover)
- ProTool or equivalent coding software
If you're in the Chicagoland area and need help coding, feel free to reach out! Thanks for watching and if there are any questions, comment below.
Timeline:
Intro: 0:00 - 0:22
Remove Fuse: 0:23 - 0:43
Depressurize Fuel System: 0:44 - 1:03
Remove Fuel Lines: 1:04 - 1:51
Remove Connectors: 2:03 - 2:47
Remove Injector Bracket: 2:48 - 3:40
Injector Removal: 3:41 - 4:47
Precision Raceworks Tool: 4:48 - 5:30
Installing Injector Info: 5:31 - 6:20
Compressing Teflon Injector Seal: 6:21 - 6:57
Installing Injector and Bracket (Trick included): 6:58 - 8:42
Line Installation: 8:43 - 10:25
Injector Coding (Protool): 10:26 - 12:15
Wrapping up car and Startup: 12:16 - 13:19
Injector Seal Replacement:
N54 N63 S63 Fuel Injector Seal Replac...
What you'll need:
- E10 torx socket (Injector Brace)
- 14mm open end wrench (Fuel Lines)
- Precision Raceworks N54 Injector Tool or equivalent
- 8mm socket (cowl) and 5mm hex (engine cover)
- ProTool or equivalent coding software
If you're in the Chicagoland area and need help coding, feel free to reach out! Thanks for watching and if there are any questions, comment below.
Timeline:
Intro: 0:00 - 0:22
Remove Fuse: 0:23 - 0:43
Depressurize Fuel System: 0:44 - 1:03
Remove Fuel Lines: 1:04 - 1:51
Remove Connectors: 2:03 - 2:47
Remove Injector Bracket: 2:48 - 3:40
Injector Removal: 3:41 - 4:47
Precision Raceworks Tool: 4:48 - 5:30
Installing Injector Info: 5:31 - 6:20
Compressing Teflon Injector Seal: 6:21 - 6:57
Installing Injector and Bracket (Trick included): 6:58 - 8:42
Line Installation: 8:43 - 10:25
Injector Coding (Protool): 10:26 - 12:15
Wrapping up car and Startup: 12:16 - 13:19
4 سال پیش
در تاریخ 1399/03/15 منتشر شده
است.
24,453
بـار بازدید شده