Setup Tutorial of Thrustmaster TCA throttle quadrant for Airbus aircraft in X-Plane 11.
37.2 هزار بار بازدید -
3 سال پیش
-
Don't waste a lot of
Don't waste a lot of time setting up. Skip to the parts you need.
1:50 Calibration of thrust levers in X-Plane
3:00 How Windows 10 shows the throttle quadrant--Useless!
4:20 More than you could ever need to know about the Alpha and Beta range
7:28 Setting X-Plane throttle Response Curves
9:37 Toliss Airbus A319 ISCS settings you must set, and how to make it easy.
12:54 Toliss A321, same stuff. Make sure you have one separate Joystick configuration for all the Toliss aircraft.
13:50 Flight Factor A320. Same concepts, different way of doing things. Make a Flight Factor joystick profile!!! You can learn from my mistakes!
18:19 JAR Designs A330. They try to make it easy, all you have to do is forget half of what I taught you! Seriously, they did a good job, but TCA compatibility is like an easter egg in the software package. I'll say it again, make a profile for the JAR A330.
20:22 JAR button/knob/switch setup
21:09 Flight Factor button/knob/switch setup
23:06 Toliss button/knob/switch setup, for both A319 and A320
23:40 Done....But test it out and learn how and when to do a manual start vs an auto start on the A319/320/321. Learning is allowed on this channel, remember?
I'm sorry it's 27 minutes long, but that's better than wasting a whole afternoon like I did. I'm a pilot, not a code-writing hardware-tinkerer. All the unboxings and reviews made it sound like this was almost plug-and-play. Documentation was mediocre, and I'm still not sure if it made any difference to update firmware, install drivers or perform the calibration procedure. You will need this for flying Airbus aircraft in X-Plane. Sorry, I haven't tried the FF A350 with this yet, but I'm sure it'll work. Enjoy!
1:50 Calibration of thrust levers in X-Plane
3:00 How Windows 10 shows the throttle quadrant--Useless!
4:20 More than you could ever need to know about the Alpha and Beta range
7:28 Setting X-Plane throttle Response Curves
9:37 Toliss Airbus A319 ISCS settings you must set, and how to make it easy.
12:54 Toliss A321, same stuff. Make sure you have one separate Joystick configuration for all the Toliss aircraft.
13:50 Flight Factor A320. Same concepts, different way of doing things. Make a Flight Factor joystick profile!!! You can learn from my mistakes!
18:19 JAR Designs A330. They try to make it easy, all you have to do is forget half of what I taught you! Seriously, they did a good job, but TCA compatibility is like an easter egg in the software package. I'll say it again, make a profile for the JAR A330.
20:22 JAR button/knob/switch setup
21:09 Flight Factor button/knob/switch setup
23:06 Toliss button/knob/switch setup, for both A319 and A320
23:40 Done....But test it out and learn how and when to do a manual start vs an auto start on the A319/320/321. Learning is allowed on this channel, remember?
I'm sorry it's 27 minutes long, but that's better than wasting a whole afternoon like I did. I'm a pilot, not a code-writing hardware-tinkerer. All the unboxings and reviews made it sound like this was almost plug-and-play. Documentation was mediocre, and I'm still not sure if it made any difference to update firmware, install drivers or perform the calibration procedure. You will need this for flying Airbus aircraft in X-Plane. Sorry, I haven't tried the FF A350 with this yet, but I'm sure it'll work. Enjoy!
3 سال پیش
در تاریخ 1399/12/29 منتشر شده
است.
37,225
بـار بازدید شده