How To Program A Lincoln Navigator Remote Key Fob 1998 - 2010
22 هزار بار بازدید -
5 سال پیش
-
An easy to follow video
An easy to follow video on how to program a remote key fob for a 1998 - 2010 Lincoln Navigator.
Find more free keyless entry programming instructions at http://www.ProgramYourRemote.com/
1. Unlock all doors using the power door lock switch on door panel.
2. Turn ignition from OFF to ON 8 times within 10 seconds, with the 8th time ending in ON. Door locks will cycle to confirm programming mode. (*ON is as far forward as you can turn without starting the vehicle*)
3. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
4. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming. (*If you only have one remote to program skip step 4*)
5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
Find more free keyless entry programming instructions at http://www.ProgramYourRemote.com/
1. Unlock all doors using the power door lock switch on door panel.
2. Turn ignition from OFF to ON 8 times within 10 seconds, with the 8th time ending in ON. Door locks will cycle to confirm programming mode. (*ON is as far forward as you can turn without starting the vehicle*)
3. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
4. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming. (*If you only have one remote to program skip step 4*)
5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
5 سال پیش
در تاریخ 1398/03/20 منتشر شده
است.
22,099
بـار بازدید شده