Easy Hoist Crane build for the Shop
7 هزار بار بازدید -
3 سال پیش
-
Installing a small overhead crane
Installing a small overhead crane in my shop that will lift sheet metal onto the plasma table. I have rated it at 300 lbs. at a 4:1 safety ratio. This idea taps into the existing structure of my shop and was very simple to install.
Full disclaimer.
This is how I do it and do not recommend you do it the same way. Your building and needs will be different and the purpose of this video is for entertainment only.
Thank you for watching and enjoy.
https://www.princessauto.com/en/1-ton...
#hoist
#diyhoist
#crane
#manualmachining
#machining
#diyshop
#liftingsolutions
#liftingsolution
#machining
#shopbuild
#rapidtap
Full disclaimer.
This is how I do it and do not recommend you do it the same way. Your building and needs will be different and the purpose of this video is for entertainment only.
Thank you for watching and enjoy.
https://www.princessauto.com/en/1-ton...
#hoist
#diyhoist
#crane
#manualmachining
#machining
#diyshop
#liftingsolutions
#liftingsolution
#machining
#shopbuild
#rapidtap
3 سال پیش
در تاریخ 1400/07/20 منتشر شده
است.
7,078
بـار بازدید شده