DR-107 One Design RC plane build, Update #13, Fuselage construction continued
762 بار بازدید -
3 ماه پیش
-
This is a series on
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk.
In this update, construction of the fuselage is continued. The empennage stringers are constructed and the fuselage bottom is sheeted. A comparison of several different types of stringer construction is discussed before adding them. The fuselage is broken free from the build table to accommodate adding the stringers. The design consideration for the bottom stingers and bottom sheeting is discussed and how it relates to the full scale airplane. Acetone is tried to debond a stringer for realignment. Horizontal and vertical stabs are given a cursory alignment check and bottom sheeting is applied. Forward fuselage sheeting is applied using Gorilla Glue polyurethane glue.
00:00 Intro and discussion of different types of stringer construction
04:53 Adding stringers to empennage
06:44 Removing fuselage from build table
07:50 Design consideration for bottom stinger/sheeting
09:50 Horizontal stab support added
11:19 Acetone is used to realign a glued stringer
12:30 Alignment checks and bottom sheeting attached
14:42 Forward fuselage/battery hatch sheeting glued in place
15:24 Pros and cons of using Gorilla Glue polyurethane glue
16:40 Sheeting applied
In this update, construction of the fuselage is continued. The empennage stringers are constructed and the fuselage bottom is sheeted. A comparison of several different types of stringer construction is discussed before adding them. The fuselage is broken free from the build table to accommodate adding the stringers. The design consideration for the bottom stingers and bottom sheeting is discussed and how it relates to the full scale airplane. Acetone is tried to debond a stringer for realignment. Horizontal and vertical stabs are given a cursory alignment check and bottom sheeting is applied. Forward fuselage sheeting is applied using Gorilla Glue polyurethane glue.
00:00 Intro and discussion of different types of stringer construction
04:53 Adding stringers to empennage
06:44 Removing fuselage from build table
07:50 Design consideration for bottom stinger/sheeting
09:50 Horizontal stab support added
11:19 Acetone is used to realign a glued stringer
12:30 Alignment checks and bottom sheeting attached
14:42 Forward fuselage/battery hatch sheeting glued in place
15:24 Pros and cons of using Gorilla Glue polyurethane glue
16:40 Sheeting applied
3 ماه پیش
در تاریخ 1403/04/17 منتشر شده
است.
762
بـار بازدید شده