RobotDyn AC Light Dimmer. Zero-cross pulse shift
11.7 هزار بار بازدید -
6 سال پیش
-
Control impulse demonstration. Brightness of
Control impulse demonstration.
Brightness of the incandescent lamp is controlled with a dimmer connected to RobotDyn Mega (aka Arduino Mega). Brightness control is carried out via buttons. Output voltage is displayed on the multimeter. The values of control impulse (yellow channel) and zero-cross (blue channel) are displayed on the oscillograph.
The project is done using an RBDdimmer library for Arduino: https://github.com/RobotDynOfficial/L...
===
Discussion and support on FB — Facebook: 623343184748593
Documentation on our website:
AC Light Dimmer Module —
Mega 2560 CH340G/ATmega2560-16AU — https://robotdyn.com/mega-2560-ch340g...
Button Switch module — https://robotdyn.com/button-switch-mo...
Analog Slide Position — https://robotdyn.com/analog-slide-pos...
Brightness of the incandescent lamp is controlled with a dimmer connected to RobotDyn Mega (aka Arduino Mega). Brightness control is carried out via buttons. Output voltage is displayed on the multimeter. The values of control impulse (yellow channel) and zero-cross (blue channel) are displayed on the oscillograph.
The project is done using an RBDdimmer library for Arduino: https://github.com/RobotDynOfficial/L...
===
Discussion and support on FB — Facebook: 623343184748593
Documentation on our website:
AC Light Dimmer Module —
Mega 2560 CH340G/ATmega2560-16AU — https://robotdyn.com/mega-2560-ch340g...
Button Switch module — https://robotdyn.com/button-switch-mo...
Analog Slide Position — https://robotdyn.com/analog-slide-pos...
6 سال پیش
در تاریخ 1397/09/20 منتشر شده
است.
11,780
بـار بازدید شده