Origami Wolverine Claws - How to Fold || Halloween Costume
26.7 هزار بار بازدید -
2 سال پیش
-
In this video I will
In this video I will teach how to make paper Wolverine claws. This origami consists of 3 parts, one for each blade. The entire process uses only origami techniques and does not need glue.
This model is my creation (Wellington F. Oliveira), but I used the origami claws created by @torself as inspiration.
Material needed:
3 squares of paper of the same size for each hand. For a child I recommend using 15x15 cm (about 6x6"), for an adult I recommend 25x25 cm (10x10"). These sizes vary from person to person, so test first, then adjust as needed.
Music: Target Fuse - French Fuse
It was taken from the youtube free music library.
==========================================================
Vídeo em português aqui: Origami: Garras do Wolverine - Instru...
==========================================================
Instagram: Instagram: easyorigamibr
TikTok: TikTok: easyorigamibr
#origami #claws #wolverine #xmen
This model is my creation (Wellington F. Oliveira), but I used the origami claws created by @torself as inspiration.
Material needed:
3 squares of paper of the same size for each hand. For a child I recommend using 15x15 cm (about 6x6"), for an adult I recommend 25x25 cm (10x10"). These sizes vary from person to person, so test first, then adjust as needed.
Music: Target Fuse - French Fuse
It was taken from the youtube free music library.
==========================================================
Vídeo em português aqui: Origami: Garras do Wolverine - Instru...
==========================================================
Instagram: Instagram: easyorigamibr
TikTok: TikTok: easyorigamibr
#origami #claws #wolverine #xmen
2 سال پیش
در تاریخ 1401/03/11 منتشر شده
است.
26,716
بـار بازدید شده