NX CAM Manufacturing Setup Webinar - PROLIM

In this webinar, we’ll discuss best practices for setting up your Manufacturing CAM Environment using the Master Model, Associative Blank Geometry, and a Vise Assembly. First, we’ll create and add these components into our CAM file, constrain, and link them. Next, we’ll make necessary changes to the linked geometry for manufacturing purposes without disrupting the Master Model. Then, we can define our MCS location and our Workpiece Geometry (Part, Blank, Check). Once that is complete, we can inherit Cut Areas into operations, saving valuable time. Creating Holders and Operations will follow. Finally, we will Post Process and deliver Shop Documentation to the shop floor operators.

Like-PROLIM-on-Facebook:-Facebook: prolimcorporation-
Follow-PROLIM-on-Twitter:-Twitter: prolimglobal-
PROLIM-LinkedIn:-LinkedIn: prolim-corporation
Instagram-:-Instagram: prolimcorporation

• #science_technology
• #ally_plm
• #prolim_plm
• #plm
• #nx
• #product_development
• #cad
• #cam
• #plm_connection
• #webinar
• #manufacturing
• #manufacturing_setup
• #nx_cam
• #nx_cad