HVACR: How To Wire/Install A Hard Start Kit For AC/Refrigeration Systems (SUPCO 3 N 1 Installation)
50.2 هزار بار بازدید -
2 سال پیش
-
HVACR: How To Wire/Install A
HVACR: How To Wire/Install A Hard Start Kit For AC/Refrigeration Systems (Supco 3 N 1 Installation) HVAC Hard Start Kit Instructions/Wiring Diagram/Installation/Install/Troubleshooting/How To Check A Hard Start Kit
The 3 n'1 Start Relay adds new life to old refrigerators and freezers by providing an additional boost to the compressor. Replaces all 3 electrical components - relay, overloard and start capacitor on all capillary systems. Completely prewires. Installs qucikly and easily by simply pushing on 3 female pin terminals. Used for refrigeration systems with or without run capacitors. Sizing is based on the HP rating of the compressor, and the continuous running amperage.
Follow me on instagram! @JumperManTech
For all inquiries E-mail [email protected]
The 3 n'1 Start Relay adds new life to old refrigerators and freezers by providing an additional boost to the compressor. Replaces all 3 electrical components - relay, overloard and start capacitor on all capillary systems. Completely prewires. Installs qucikly and easily by simply pushing on 3 female pin terminals. Used for refrigeration systems with or without run capacitors. Sizing is based on the HP rating of the compressor, and the continuous running amperage.
Follow me on instagram! @JumperManTech
For all inquiries E-mail [email protected]
2 سال پیش
در تاریخ 1400/12/07 منتشر شده
است.
50,202
بـار بازدید شده