Shopsmith MARK 7 Introduction - The #1 Multi-Purpose Woodworking Tool in America
58.7 هزار بار بازدید -
7 سال پیش
-
Short MARK 7 Video Introduction.
Short MARK 7 Video Introduction. See the full demonstration at @Shopsmith76
Shopsmith MARK 7 Full Demonstration -...
The predecessor of today's revolutionary Shopsmith MARK 7 (the legendary 5-tools-in-1 Shopsmith Mark V) was the world's original combination woodworking machine. Since its introduction in 1953, a series of important improvements have been made to the Mark V, including:
An upgrade from a 3/4 hp motor to a 1-1/8 hp motor, providing added power.
An upgrade from a single bearing quill to a 2-bearing quill, reducing run-out & wobble.
The introduction of new, larger table systems for added workpiece support & operator convenience.
Larger, easier-to-operate rip fences with built-in accommodations for fixtures.
A new removable safety switch, and many other smaller improvements for added safety & working convenience.
Over 600,000 Mark Vs have been sold world-wide since 1953... and today, most of them are still serving their owners, just as they did when they were new.
Today's MARK 7 represents the Ultimate Shopsmith Upgrade, supported by the amazing new PowerPro Headstock and including two more of the most needed woodworking tools in a single, compact package.
With Shopsmith's latest MARK 7 machine, you get a 10" Table Saw - 34" Lathe - 12" Disc Sander - 16-1/2" Vertical Drill Press - Over/Under-Table Router - Over/Under Table Shaper and Horizontal Boring Machine in an amazingly small two-foot by six-foot space. Just tuck it snugly away in a corner of the garage or basement until it's needed then pull it out to go to work.
And, if you don't need the added advantages provided by the PowerPro Headstock... or the included capabilities of an over/under table shaper and router, we still offer two tried-and-true Mark V versions that include all five of the other tool capabilities listed above.
Special thanks to Alan and Jon Gale for the canoe footage.
Shopsmith MARK 7 Full Demonstration -...
The predecessor of today's revolutionary Shopsmith MARK 7 (the legendary 5-tools-in-1 Shopsmith Mark V) was the world's original combination woodworking machine. Since its introduction in 1953, a series of important improvements have been made to the Mark V, including:
An upgrade from a 3/4 hp motor to a 1-1/8 hp motor, providing added power.
An upgrade from a single bearing quill to a 2-bearing quill, reducing run-out & wobble.
The introduction of new, larger table systems for added workpiece support & operator convenience.
Larger, easier-to-operate rip fences with built-in accommodations for fixtures.
A new removable safety switch, and many other smaller improvements for added safety & working convenience.
Over 600,000 Mark Vs have been sold world-wide since 1953... and today, most of them are still serving their owners, just as they did when they were new.
Today's MARK 7 represents the Ultimate Shopsmith Upgrade, supported by the amazing new PowerPro Headstock and including two more of the most needed woodworking tools in a single, compact package.
With Shopsmith's latest MARK 7 machine, you get a 10" Table Saw - 34" Lathe - 12" Disc Sander - 16-1/2" Vertical Drill Press - Over/Under-Table Router - Over/Under Table Shaper and Horizontal Boring Machine in an amazingly small two-foot by six-foot space. Just tuck it snugly away in a corner of the garage or basement until it's needed then pull it out to go to work.
And, if you don't need the added advantages provided by the PowerPro Headstock... or the included capabilities of an over/under table shaper and router, we still offer two tried-and-true Mark V versions that include all five of the other tool capabilities listed above.
Special thanks to Alan and Jon Gale for the canoe footage.
7 سال پیش
در تاریخ 1396/06/06 منتشر شده
است.
58,788
بـار بازدید شده