TTM57 Flex FX Echo effect routing trick

Here is how to set up the Echo effect of the TTM57 to be triggered from any group you are in. Normally you have to be in group B6 to trigger effects but not with this ninja trick.

1-Open the hardware tab on the main screen of Scratch Live.

2-Go into group B6 by pressing "Group" on the mixer and then pressing B6

3-Select "Echo" in the FX box that has the red ring around it. To move the red ring, press the "Deck" button on the mixer.

4-Press B3 to highlight the AUX button. You will also see it appear and be highlighted in the effects box.

5-Press B6 to engage the effect. You will see that now highlighted in the effects box.

You can now go to any other group of the mixer.

Press the Flex FX button next to either channel, bring the fader down and let the echo roll out.

• #howto_style
• #scratch
• #live
• #ttm57
• #rane
• #tech
• #support
• #flex
• #fx
• #echo
• #effect