Linear rails on an Elegoo Neptune 3 Max!?!?! (Part 1: X & Y)

S&M Makers
S&M Makers
8 هزار بار بازدید - پارسال - UPDATE: TBStron3D is starting to
UPDATE: TBStron3D is starting to ship linear rails with 27 instead of 28 screw holes in their Y-axis kits. The modification to the long bracket shown in the video is NOT required or recommended for kits with 27 hole rails. In this three part video, we modify our Elegoo Neptune 3 Max printer with the X, Y, and Z linear rail kits from TBStron3D (strong3d.myshopify.com). In part 1, we install the X-axis and Y-axis linear rail kits and then perform a buddha test print. In part 2, we will install the Z-axis linear rail kit and perform a couple quick test prints. In part 3, we will test the print quality after the three rail kits have been installed. Bed Leveler 5000 --------------------------- Bed Leveler 5000:    • Bed Leveler 5000   Homepage: sandmmakers.com/Projects/BedLeveler5000 Source code: github.com/sandmmakers/BedLeveler5000 Binaries: github.com/sandmmakers/BedLeveler5000 Support us on Patreon: patreon.com/sandmmakers Chapters -------------- 00:00 | Opening 00:09 | Introduction 01:24 | Contents of rail kits 02:45 | Cleaning the rails 07:23 | Lubricating the rails 10:55 | Installing the Y-axis kit 21:54 | Installing the X-axis kit 26:13 | Testing 27:18 | Wrap-up Corrections: 02:25 | The Z-axis kit contains two LIN12C rails. Linear Rail Details ----------------------------- X-axis kit: 1x 50cm LIN9H linear rail Y-axis kit: 2x 55cm LIN9C linear rails Z-axis kit: 2x 55cm LIN12C linear rails Numakers Filament (Affiliate links) -------------------------------------------------------- At S&M Makers, we use and highly recommend Numakers filaments. Their easy to use PLA+, PETG, ASA, silk, and wood options have given us flawless prints every time. Please consider using our affiliate links below. We receive a small percentage from every purchase and it really helps out the channel. Homepage - numakers.com/?ref=sandmmakers PLA+ - numakers.com/products/pla-filament?ref=sandmmakers ASA - numakers.com/challenge?ref=sandmmakers Supplies ---------------------------- TBStron3D Neptune 3 Max X-axis rail kit - strong3d.myshopify.com/products/max?variant=454629… TBStron3D Neptune 3 Max Y-axis rail kit - strong3d.myshopify.com/products/max?variant=454629… Carlton Mist Porcelain Paver - www.lowes.com/pd/Satori-24-x-24-in-Sendero-Mist-Pa… 4 Children's playmat tiles - a.co/d/33CedqA SuperLube 21030 - a.co/d/aIBb3lB 99.9% IPA - a.co/d/2CrZ8Oa Compressed Air - a.co/d/1SYz81Q Blunt-tip syringe - a.co/d/0qUCyjR Calipers - www.lowes.com/pd/General-Tools-Instruments-6-in-Di… Slap mat - whambam3d.com/products/mega-slap-mat-1 Misc ------------ Paper towels Toothpicks Cotton swabs Twist ties or small gauge wire Container to soak rails Microfiber cloth Toothbrush Masking tape Pen or Pencil Tools to modify metal bracket 2mm, 2.5mm, 3mm hex wrenches 3/16" and 8mm sockets
پارسال در تاریخ 1402/05/26 منتشر شده است.
8,059 بـار بازدید شده
... بیشتر