Carvera PCB fabrication CopperCAM VS FlatCAM
8.3 هزار بار بازدید -
2 سال پیش
-
Hi Makers,
Let's do some
Hi Makers,
Let's do some PCB FABRICATION.
This video will compare the 2 recommended PCB CAM software, CopperCAM, and Flatcam. Both of this software have a place for now before we launch the Carvera CAM software. This is a basic guide on PCB fabrication and some tips and tricks to get you started.
If you have any questions or comments leave that down below.
Links to our social media support and comms pages are below:
Discord - https://discord.gg/bnB23fwZ6v
Facebook - https://www.facebook.com/groups/carvera
Instagram - https://www.instagram.com/makera_inc/
Main Channel -
The website and ONLINE STORE are below:
https://www.makera.com/
Enjoy!
Chapters breakdown:
https://www.seevid.ir/fa/w/rzdFOSC0QNg Intro
https://www.seevid.ir/fa/w/rzdFOSC0QNg Flatcam overview
https://www.seevid.ir/fa/w/rzdFOSC0QNg Coppercam overview
https://www.seevid.ir/fa/w/rzdFOSC0QNg Coppercam programming
https://www.seevid.ir/fa/w/rzdFOSC0QNg Coppercam milling
https://www.seevid.ir/fa/w/rzdFOSC0QNg Flatcam setup and breakdown
https://www.seevid.ir/fa/w/rzdFOSC0QNg Flatcam programming
https://www.seevid.ir/fa/w/rzdFOSC0QNg Flatcam file combine and edit
https://www.seevid.ir/fa/w/rzdFOSC0QNg Flatcam milling
https://www.seevid.ir/fa/w/rzdFOSC0QNg GCode Z height modifier tip
https://www.seevid.ir/fa/w/rzdFOSC0QNg .1mm depth results
https://www.seevid.ir/fa/w/rzdFOSC0QNg Flip
https://www.seevid.ir/fa/w/rzdFOSC0QNg Outro
2 سال پیش
در تاریخ 1401/12/08 منتشر شده
است.
8,376
بـار بازدید شده