How I Lubed my Keyboard (Without Desoldering) (Typing ASMR)
168 هزار بار بازدید -
4 سال پیش
-
Ideally desoldering and taking apart
Ideally desoldering and taking apart each switch is the BEST way to lube the keyboard but that takes longer and takes way more steps (Which means a higher chance that you could mess something up). Results will vary across the board as this method is not consistent from key to key.
The board I'm using is the HyperX Alloy Origins Core TKL (Linear Reds), I did the sound test using the stock keycaps and on the same desk to give as accurate a representation of the change in sound as possible.
I do have some clips that have the HyperX Pudding PBT keycaps. I will say that PBT keycaps will make the board sound a little better, video coming on keycaps in the near future, you'll want to subscribe so you don't miss it!
Timestamps:
0:00 Intro
0:07 Disclaimer
0:23 Things You'll Need
1:30 Lubing Stabilizers
3:23 Keyswitch Method 1
4:25 Keyswitch Method 2
5:30 Sound Test (Modifiers Unlubed)
6:00 Sound Test (Typing Unlubed)
6:13 Sound Test (Modifiers Lubed)
6:41 Sound Test (Typing Lubed)
7:20 Conclusion & Closing Remarks
DISCLAIMER: DO THIS AT YOUR OWN RISK
Also, my research suggests to NOT do this on tactile switches (Linears only)
Links to Social:
mylinks.ai/shakemuzzi
Individual Links:
Instagram: www.instagram.com/shakemuzzi
TikTok: www.tiktok.com/@shakemuzzi
Twitter: twitter.com/shakemuzzi
4 سال پیش
در تاریخ 1399/10/25 منتشر شده
است.
168,025
بـار بازدید شده