Micro:bit Automatic Plant Watering System

Michael Klements
Michael Klements
110.5 هزار بار بازدید - 4 سال پیش - In this video, I'll show
In this video, I'll show you how to build an automatic plant watering system using a Micro:bit and some other small electronic components.

The Micro:bit monitors the moisture content of your plant's soil using a capacitive moisture sensor and then uses a relay to drive a pump to water the plant if the soil gets too dry. This way, your plant is always looked after, even when you've forgotten about it or you're away.

Here's a link to the full write-up of the project if you'd like to build you own - https://www.the-diy-life.com/microbit...

Purchase Links:
Micro:bit – https://amzn.to/2JIQHFD
Capacitive Moisture Sensor – https://amzn.to/2VQdAcQ
DC Pump – https://amzn.to/2LbeRc5
Relay Module – https://amzn.to/2VMEeDe
Ribbon Cable – https://amzn.to/340xB3B
Storage Containers (Not the same, but should work) – https://amzn.to/36QWKAA
Power Supply – https://amzn.to/2LgNhdH
M3 Screws – https://amzn.to/2AtFG5W

Note: Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you.

If you've got any ideas for tech or electronics projects or tutorials which you'd like me to try out, let me know in the comments section.
4 سال پیش در تاریخ 1399/09/17 منتشر شده است.
110,575 بـار بازدید شده
... بیشتر