Common Mode RF ChokeTester DIY - Part 1
3.3 هزار بار بازدید -
4 ماه پیش
-
This is a 2 port
This is a 2 port sensor/tester that is easy to build and easy to use.
Please note switching-in the 150 ohm resistor does not make the meter more sensitive.
I should have said it requires an increase of the "sensitivity control" to get a full scale calibration reading. This is only needed for much higher common mode currents than demonstrated in the video.
Please note switching-in the 150 ohm resistor does not make the meter more sensitive.
I should have said it requires an increase of the "sensitivity control" to get a full scale calibration reading. This is only needed for much higher common mode currents than demonstrated in the video.
4 ماه پیش
در تاریخ 1403/01/05 منتشر شده
است.
3,329
بـار بازدید شده