THE HAMMER | Cast Aluminum and Lead from 3D Printed Patterns
770.2 هزار بار بازدید -
7 سال پیش
-
I made a cast aluminum
I made a cast aluminum and lead hammer using multiple 3D printed molds and patterns. A lead hammer is useful for 'persuading' things where you do not want to leave a mark. You simply recast the head when it needs it.
I think the noir theme came from the narrator's voice in my head every time I said the word 'hammer'... something different!
A huge thank you for the shout-out on the Making It Podcast!
If you have not tuned in yet, check it out!!!
Making It Podcast : Hosted by Jimmy Diresta, Bob Clagett and David Picciuto
http://makingitpodcast.com/
(For those who are curious, Oltrogge is pronounced like you would say Ultra-Geek but leave off the 'k'-- :)
www.grunblau.com
Spy Glass Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b...
I think the noir theme came from the narrator's voice in my head every time I said the word 'hammer'... something different!
A huge thank you for the shout-out on the Making It Podcast!
If you have not tuned in yet, check it out!!!
Making It Podcast : Hosted by Jimmy Diresta, Bob Clagett and David Picciuto
http://makingitpodcast.com/
(For those who are curious, Oltrogge is pronounced like you would say Ultra-Geek but leave off the 'k'-- :)
www.grunblau.com
Spy Glass Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b...
7 سال پیش
در تاریخ 1396/05/08 منتشر شده
است.
770,288
بـار بازدید شده