Make a DIY Motorcycle DYNO with ARDyno - Part 1 - J's Garage
67.6 هزار بار بازدید -
5 سال پیش
-
It is finally time to
It is finally time to build my ARDyno! I have been waiting for a while waiting for the right bits and pieces.
https://ardyno.weebly.com/ - Get an ARDyno board for yourself
@2strokestuffing - 2strokestuffing
http://s.click.aliexpress.com/e/l6gAbjy4 - Uno R3
http://s.click.aliexpress.com/e/cvQXKJwY - NPN Hall sensor
http://s.click.aliexpress.com/e/dyr4c3iC - Inductive Clamp
Well after owning this board for longer than I would like to admit I have finally got the bare bones of a dyno setup...
ARDyno just requires a big roller, this one is about 300lbs for just the roller itself. Then you need a RPM input signal from the roller and also an RPM input from the engine you are running.
Bonus at the end of a quick run up of the RC-One Typhoon 2 stroke.
Some of the tools I use:
Vevor Case splitter/ Crank Puller Combo:
https://s.click.aliexpress.com/e/_DdO...
Multi Piece Flywheel Puller:
https://s.click.aliexpress.com/e/_DDW...
Piston TDC/Ignition Measuring tool:
https://s.click.aliexpress.com/e/_DkB...
Pressure Tester
https://s.click.aliexpress.com/e/_Dmb...
Roller Weight Scale
https://s.click.aliexpress.com/e/_Dlj...
Dial Indicator with Magnetic Base
https://s.click.aliexpress.com/e/_Dks...
Crimp Tool for Motorcycle/Automotive Plugs
https://s.click.aliexpress.com/e/_Dnc...
Fluke Multimeter
https://s.click.aliexpress.com/e/_Dkd...
https://ardyno.weebly.com/ - Get an ARDyno board for yourself
@2strokestuffing - 2strokestuffing
http://s.click.aliexpress.com/e/l6gAbjy4 - Uno R3
http://s.click.aliexpress.com/e/cvQXKJwY - NPN Hall sensor
http://s.click.aliexpress.com/e/dyr4c3iC - Inductive Clamp
Well after owning this board for longer than I would like to admit I have finally got the bare bones of a dyno setup...
ARDyno just requires a big roller, this one is about 300lbs for just the roller itself. Then you need a RPM input signal from the roller and also an RPM input from the engine you are running.
Bonus at the end of a quick run up of the RC-One Typhoon 2 stroke.
Some of the tools I use:
Vevor Case splitter/ Crank Puller Combo:
https://s.click.aliexpress.com/e/_DdO...
Multi Piece Flywheel Puller:
https://s.click.aliexpress.com/e/_DDW...
Piston TDC/Ignition Measuring tool:
https://s.click.aliexpress.com/e/_DkB...
Pressure Tester
https://s.click.aliexpress.com/e/_Dmb...
Roller Weight Scale
https://s.click.aliexpress.com/e/_Dlj...
Dial Indicator with Magnetic Base
https://s.click.aliexpress.com/e/_Dks...
Crimp Tool for Motorcycle/Automotive Plugs
https://s.click.aliexpress.com/e/_Dnc...
Fluke Multimeter
https://s.click.aliexpress.com/e/_Dkd...
5 سال پیش
در تاریخ 1398/01/24 منتشر شده
است.
67,607
بـار بازدید شده