FIT ANY ANGLE GRINDING DISKS TO A BENCH GRINDER?!
2.2 هزار بار بازدید -
3 سال پیش
-
What's up mate? Today I
What's up mate? Today I wanted to find a solution to be able to fit my angle grinder disks on my bench grinder, the reason for doing this it's because the grinding disks are cheaper and give you a wider range for a fraction of the cost of a grinding wheel!. After using this hack to modify your bench grinder now you will be able to use different wheels such as polishing disks, wire brush grinding disks, etc.
All I had to use was a 3/4" inch male to male water fitting, some existing parts that were keeping together the old grinding wheel and the safety pin.
I hope this helps :D Let me know in the comments!
#Benchgrinder #benchgrinderbasics #metaltools
All I had to use was a 3/4" inch male to male water fitting, some existing parts that were keeping together the old grinding wheel and the safety pin.
I hope this helps :D Let me know in the comments!
#Benchgrinder #benchgrinderbasics #metaltools
3 سال پیش
در تاریخ 1400/11/06 منتشر شده
است.
2,275
بـار بازدید شده