Sanding and Refinishing Hardwood Floors (step by step)
2.2 میلیون بار بازدید -
10 سال پیش
-
http://www.howtosandafloor.com/refini...
Sanding and refinishing hardwood floors is relatively easy by contrast to parquet floors or pine floorboards. Generally you can start sanding on a finer grit than the average floor.
This is due to the floor being a lot flatter than other floors. Also, the texture and moisture content of hardwoods is generally conducive to finer sanding. This is also the method you would use on engineered hardwood flooring.
People always wonder if they can sand and refinish their engineered wood flooring, the answer of course is YES. Unless it is only a 1mm vineer, which very rare indeed.
Start of sanding at around 50 or 60 grit, do the same around the edges and corners, then belt sand with 80 and 100. Finally edge the floor with an 80 grit and smooth the corners with an 80 grit.
You can then buff the floor or use a rotary machine at an 80 and 100 grit, but usually that's beyond the purview of a DIYer.
Check out some of my other videos for tips on lacquering your floor.
I hope this helps, If you have any questions, by all means post them in the comments section below.
Good luck with restoring your hardwood floors!
-----------------------------------------------------------
BONA TRAFFIC HD LINKS (you can change the sheen level you want)
UK https://amzn.to/370RXK8
USA https://amzn.to/34M9Nz2
BONA PRIMER (SEALER)
UK https://amzn.to/38agTkr
USA https://amzn.to/2VoYhHW
------------------------------------------------------------
LINKS FOR ACCESSORIES
Roller For Lacquer
UK https://amzn.to/2Zl6OfV (the same roller used in the video for lacquering)
USA https://amzn.to/34J4xfL
Roller For Stain
UK https://amzn.to/35NMTbL
USA https://amzn.to/34LAu71
Rags For Stain
UK https://amzn.to/2EG1pXg
USA https://amzn.to/2Q721um
Respirator (face mask)
UK https://amzn.to/39gcqg8
USA https://amzn.to/2USdr7s
https://howtosandafloor.com
Sanding and refinishing hardwood floors is relatively easy by contrast to parquet floors or pine floorboards. Generally you can start sanding on a finer grit than the average floor.
This is due to the floor being a lot flatter than other floors. Also, the texture and moisture content of hardwoods is generally conducive to finer sanding. This is also the method you would use on engineered hardwood flooring.
People always wonder if they can sand and refinish their engineered wood flooring, the answer of course is YES. Unless it is only a 1mm vineer, which very rare indeed.
Start of sanding at around 50 or 60 grit, do the same around the edges and corners, then belt sand with 80 and 100. Finally edge the floor with an 80 grit and smooth the corners with an 80 grit.
You can then buff the floor or use a rotary machine at an 80 and 100 grit, but usually that's beyond the purview of a DIYer.
Check out some of my other videos for tips on lacquering your floor.
I hope this helps, If you have any questions, by all means post them in the comments section below.
Good luck with restoring your hardwood floors!
-----------------------------------------------------------
BONA TRAFFIC HD LINKS (you can change the sheen level you want)
BONA PRIMER (SEALER)
------------------------------------------------------------
LINKS FOR ACCESSORIES
Roller For Lacquer
Roller For Stain
Rags For Stain
Respirator (face mask)
https://howtosandafloor.com
10 سال پیش
در تاریخ 1393/08/01 منتشر شده
است.
2,248,967
بـار بازدید شده