Mod the latest DJI firmware with Super Patcher 2.0

For consulting services please email me at [email protected]
This is a quick video showing the updated Super Patcher 2.0 tool by brett8883. You can find the tool here: https://github.com/brett8883/DJI_Supe...

This tool allows you to safely, easily and quickly modify your DJI aircraft on *newer firmware versions*. You will need to use assistant 2 to change speed, vertical ascent, winds, but this will hard code bypass height and nfz among other things.

Super Patcher supports the following
------------------------------------------------------------------
Mavic Pro V01.04.0300
Spark V01.00.0900
Phantom 4 Pro V01.05.0600
Phantom 4 standard V2.00.0700
Phantom 4 advanced V1.00.0128
Phantom 4 ProV2 V01.00.1500
Inspire 2 v1.02.0200

Modifications
---------------------------------------------------------------------
Remove height limitations
Remove NFZ and GeoZone limits
Enable Galileo satellite reception
No motors errors on Mavic Pro Platinum
Does NOT require an internal SD card be installed
Precision RTH and Precision Landing will work normally
Optionally enable slower more cinematic panning (yaw) speed
Optionally enable full time FCC or boost mode with jkson_fcc_mod

*IMPORTANT!! Make sure you are on stock firmware before flashing to custom firmware. Also, read and follow ALL of the steps properly.

https://github.com/brett8883/DJI_Supe...

Download link: https://github.com/brett8883/DJI_Supe...

• #sports
• #dji
• #mavic
• #phantom
• #platinum
• #inspire
• #spark
• #mod
• #firmware
• #height
• #flight
• #zone
• #nfz
• #super
• #patcher
• #super_patcher
• #tool