Set Static IP Address on EVE-NG: Restart the setup process
33.2 هزار بار بازدید -
پارسال
-
Find out how to switch
Find out how to switch from DHCP to a Static IP address on EVE-NG. If your EVE-NG installation was not able to get an IP address via DHCP, then you can restart the EVE-NG setup process and manually configure a static IP address using the steps below.
To do this, follow these steps:
1. Login to the EVE-NG VM (default: username: root / password eve)
2. Remove the saved EVE-NG config file: rm -f /opt/ovf/.configured
3. Restart the setup process: su -
4. Go through the setup process (select a static IP address using the spacebar)
5. After the reset process is finished, your EVE-NG will be set up with the new static IP address.
To do this, follow these steps:
1. Login to the EVE-NG VM (default: username: root / password eve)
2. Remove the saved EVE-NG config file: rm -f /opt/ovf/.configured
3. Restart the setup process: su -
4. Go through the setup process (select a static IP address using the spacebar)
5. After the reset process is finished, your EVE-NG will be set up with the new static IP address.
پارسال
در تاریخ 1401/11/19 منتشر شده
است.
33,243
بـار بازدید شده