EPLAN Tutorial PROPANEL BASIC PROJECT ZW9
16.8 هزار بار بازدید -
2 سال پیش
-
We show you how to
We show you how to create a Basic_Project.zw9 , the perfect template to get you started on a project. The settings, DT numberings, Wire Numbering, report, model and 2D drilling template should all be completed to avoid a maximum of redundant tasks. We show you here how we adapted our plot frames in such a way that all data form the DataPortal can be quickly re-used using NFPA metric symbols in a ladder (north American) environment (rotation). This makes a perfect transition between the IEC and NFPA world without too much effort. Remember at the end, the printing process takes over the scaling to your favorite page size. All you need to do is keep the same proportions. 11x17 is equivalent to 17x 26.27. Remember the original size A3 (ISO) is similar 11x17. Remember IEC control are drawn top-down in columns where as NFPA is left-right in rows, sometimes 2 sets of consecutive rows often named "ladder" (from the "ladder logic used in PLC programming)
These videos are made by EPLAN Canada, they may not reflect your way of doing schematics in your country, be insured we can do what you would like to see with EPLAN. These videos intend to show how things can be done, but are not in anyway the only way you can do things with EPLAN. Always ask your EPLAN representative for more details. Check out your nearest location on our EPLANCanada.com web site. #EPLAN
#ProPanel
.
These videos are made by EPLAN Canada, they may not reflect your way of doing schematics in your country, be insured we can do what you would like to see with EPLAN. These videos intend to show how things can be done, but are not in anyway the only way you can do things with EPLAN. Always ask your EPLAN representative for more details. Check out your nearest location on our EPLANCanada.com web site. #EPLAN
#ProPanel
.
2 سال پیش
در تاریخ 1401/02/05 منتشر شده
است.
16,865
بـار بازدید شده