How to Create Fit Point Splines and Control Point Splines in Fusion 360
81.9 هزار بار بازدید -
6 سال پیش
-
How to Use the Spline
How to Use the Spline Commands in Fusion 360. The spline commands can be activated from the sketch dropdown list or from the right-click sketch menu.
There are currently two types of spline commands available. The first type is the Fit Point Spline and the second type of spline is the Control Point Spline.
CAD splines explained: http://bit.ly/splines-explained
SUPPORT KEVIN'S MISSION
━━━━━━━━━━━━━
[Making CAD education accessible]
1. Kevin's Patreon: Patreon: productdesignonline
2. Buy Kevin a Coffee: https://www.buymeacoffee.com/pdo
3. Amazon storefront: http://bit.ly/amazonpdo
4. Subscribe to this channel: http://bit.ly/sub-right-now
TUTORIAL RESOURCES
━━━━━━━━━━━━━
1. Demo Files: https://bit.ly/sketchf360
2. Checklist for F360 beginners: http://bit.ly/f360checklist
TOP FUSION 360 PLAYLISTS
━━━━━━━━━━━━━
30 Days Series: http://bit.ly/learn-fusion360
Woodworkers: http://bit.ly/woodworker-playlist
3D Printing: http://bit.ly/3D-printing-playlist
Sculpting: http://bit.ly/sculpt-playlist
KEVIN’S FAV 3D PRINTERS
━━━━━━━━━━━━━
➞ Ultimaker: https://bit.ly/kevins-printer
➞ Prusa: http://bit.ly/prusa3dp
JOIN THE PDO COMMUNITY
━━━━━━━━━━━━━
Discord Group: https://bit.ly/PDO-Discord
Facebook Group: http://bit.ly/PDO-Fb
PDO Forum: http://bit.ly/PDO-Forum
FOLLOW KEVIN ELSEWHERE
━━━━━━━━━━━━━
Twitter: Twitter: prodesignonline
Facebook: Facebook: productdesignonline
Instagram: Instagram: productdesignonline
Want to send me something?
━━━━━━━━━━━━━
PO Box 1914
Woodinville, WA 98072
USA
TIMESTAMPS
━━━━━━━━━━━━━
0:00 - Create Fit Point Splines and Control Point Splines in Fusion 360
2:11 - Turning "snap" on
5:52 - Open or close spline
6:37 - Turn on curvature comb
7:44 - Dimensioning spline points
8:30 - Using spline as a loft guide path
13:15 - Degree 5 vs Degree 3
—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
#Fusion360 #ProductDesignOnline
There are currently two types of spline commands available. The first type is the Fit Point Spline and the second type of spline is the Control Point Spline.
CAD splines explained: http://bit.ly/splines-explained
SUPPORT KEVIN'S MISSION
━━━━━━━━━━━━━
[Making CAD education accessible]
1. Kevin's Patreon: Patreon: productdesignonline
2. Buy Kevin a Coffee: https://www.buymeacoffee.com/pdo
3. Amazon storefront: http://bit.ly/amazonpdo
4. Subscribe to this channel: http://bit.ly/sub-right-now
TUTORIAL RESOURCES
━━━━━━━━━━━━━
1. Demo Files: https://bit.ly/sketchf360
2. Checklist for F360 beginners: http://bit.ly/f360checklist
TOP FUSION 360 PLAYLISTS
━━━━━━━━━━━━━
30 Days Series: http://bit.ly/learn-fusion360
Woodworkers: http://bit.ly/woodworker-playlist
3D Printing: http://bit.ly/3D-printing-playlist
Sculpting: http://bit.ly/sculpt-playlist
KEVIN’S FAV 3D PRINTERS
━━━━━━━━━━━━━
➞ Ultimaker: https://bit.ly/kevins-printer
➞ Prusa: http://bit.ly/prusa3dp
JOIN THE PDO COMMUNITY
━━━━━━━━━━━━━
Discord Group: https://bit.ly/PDO-Discord
Facebook Group: http://bit.ly/PDO-Fb
PDO Forum: http://bit.ly/PDO-Forum
FOLLOW KEVIN ELSEWHERE
━━━━━━━━━━━━━
Twitter: Twitter: prodesignonline
Facebook: Facebook: productdesignonline
Instagram: Instagram: productdesignonline
Want to send me something?
━━━━━━━━━━━━━
PO Box 1914
Woodinville, WA 98072
USA
TIMESTAMPS
━━━━━━━━━━━━━
0:00 - Create Fit Point Splines and Control Point Splines in Fusion 360
2:11 - Turning "snap" on
5:52 - Open or close spline
6:37 - Turn on curvature comb
7:44 - Dimensioning spline points
8:30 - Using spline as a loft guide path
13:15 - Degree 5 vs Degree 3
—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
#Fusion360 #ProductDesignOnline
6 سال پیش
در تاریخ 1397/11/12 منتشر شده
است.
81,965
بـار بازدید شده