Clausing 5900 Lathe VFD conversion - NO MORE REEVES DRIVE
988 بار بازدید -
پارسال
-
I posted a video tour
I posted a video tour of my home garage machine shop and had a few people ask about the VFD conversion on my Clausing 5900 lathe that eliminates the problematic reeve drive so I decided to make a quick video explaining what I did.
Part numbers for pulley and hub that I used. (i bought the pulley used off ebay) Martin 22H150 but below is McMasterCarr part number for the same pulley.
Hub - https://www.mcmaster.com/6086K414/
Pulley - https://www.mcmaster.com/6495K615/
Part numbers for pulley and hub that I used. (i bought the pulley used off ebay) Martin 22H150 but below is McMasterCarr part number for the same pulley.
Hub - https://www.mcmaster.com/6086K414/
Pulley - https://www.mcmaster.com/6495K615/
پارسال
در تاریخ 1401/11/24 منتشر شده
است.
988
بـار بازدید شده