How to use Polycrylic for Sublimation on Tile, Wood & Canvas - Part 2
181.6 هزار بار بازدید -
4 سال پیش
-
In the sequel to the
In the sequel to the popular video about Polycrylic, I'll show you how to a different way add a layer of polyester for anything you want to print: Wood, Ceramic, Tile, Canvas or just about anything else! Dye Sublimation can be done on anything flat with this process.
Chapters
00:00 - Intro
00:45 - First Coat of Polycrylic
13:30 - 2nd Coat of Polycrylic (Timelapse)
13:45 - Printing and Pressing Photo Frame
23:12 - Printing and Pressing Canvas
28:50 - Printing and Pressing Wooden Plaque
32:29 - Printing and Pressing Tile
37:04 - Wrap Up
The process:
1. Use sandpaper (400 grit) to scuff the surface of whatever you are applying to.
2. Use a paintbrush (foam or chip) to apply the coating (There's also a spray can version).
3. Once it's less tacky, add a 2nd coat
4. Let the coating cure overnight
5. Press at 400 degree with time depending on the substrate.
6. If paper sticks to the coating, use water and a cloth to wipe the surface down.
Products used:
- Polyacrylic (Walmart/Lowes)
- Cheap paint brushes
- Cosmos Ink - https://shrsl.com/3msvm
- Epson WF-7720 printer
Equipment used:
- Tusy Heat Press
https://amzn.to/47IYhpw
- A-sub 8.5" x 11"
https://amzn.to/3Rbt3QF
- Wirester Heat Resistant Gloves
https://amzn.to/3R23MIM
- Hiipoo Ink
https://amzn.to/41atQpN
- Butcher Paper
https://amzn.to/3t3lgfW
----------------------------------------------------------------------------
👉 For future notifications, please subscribe to our channel. We will be trying to put out a video every week.
https://www.seevid.ir/c/SouthpawsSt...
➤ Support me via Patreon - Patreon: southpawsstudio
➤ Twitter - Twitter: SouthpawsStudio
➤ Facebook Page- Facebook: SouthpawStudiosTN
➤ Instagram - Instagram: southpawstudioyt
➤ TikTok - TikTok: southpawsstudioyt
➤ Facebook Group - Facebook: sublimationwithsouthpaw
➤ SPS Collection (HTW) - https://www.heattransferwarehouse.com...
➤ Newsletter Signup - https://southpaw.studio/sublimation-n...
👉 Also, if you wish to donate directly to me via BuyMeACoffee, here's the link:
https://www.buymeacoffee.com/southpaw
Chapters
00:00 - Intro
00:45 - First Coat of Polycrylic
13:30 - 2nd Coat of Polycrylic (Timelapse)
13:45 - Printing and Pressing Photo Frame
23:12 - Printing and Pressing Canvas
28:50 - Printing and Pressing Wooden Plaque
32:29 - Printing and Pressing Tile
37:04 - Wrap Up
The process:
1. Use sandpaper (400 grit) to scuff the surface of whatever you are applying to.
2. Use a paintbrush (foam or chip) to apply the coating (There's also a spray can version).
3. Once it's less tacky, add a 2nd coat
4. Let the coating cure overnight
5. Press at 400 degree with time depending on the substrate.
6. If paper sticks to the coating, use water and a cloth to wipe the surface down.
Products used:
- Polyacrylic (Walmart/Lowes)
- Cheap paint brushes
- Cosmos Ink - https://shrsl.com/3msvm
- Epson WF-7720 printer
Equipment used:
- Tusy Heat Press
https://amzn.to/47IYhpw
- A-sub 8.5" x 11"
https://amzn.to/3Rbt3QF
- Wirester Heat Resistant Gloves
https://amzn.to/3R23MIM
- Hiipoo Ink
https://amzn.to/41atQpN
- Butcher Paper
https://amzn.to/3t3lgfW
----------------------------------------------------------------------------
👉 For future notifications, please subscribe to our channel. We will be trying to put out a video every week.
https://www.seevid.ir/c/SouthpawsSt...
➤ Support me via Patreon - Patreon: southpawsstudio
➤ Twitter - Twitter: SouthpawsStudio
➤ Facebook Page- Facebook: SouthpawStudiosTN
➤ Instagram - Instagram: southpawstudioyt
➤ TikTok - TikTok: southpawsstudioyt
➤ Facebook Group - Facebook: sublimationwithsouthpaw
➤ SPS Collection (HTW) - https://www.heattransferwarehouse.com...
➤ Newsletter Signup - https://southpaw.studio/sublimation-n...
👉 Also, if you wish to donate directly to me via BuyMeACoffee, here's the link:
https://www.buymeacoffee.com/southpaw
4 سال پیش
در تاریخ 1399/09/02 منتشر شده
است.
181,619
بـار بازدید شده