Drawing Machine Assembly and First Try

Complete Bill of Materials:
http://3dmake.club/articles/drawing-m...
Files and software:
http://3dmake.club/articles/drawing-m...

My build of Drawing Machine by cyul (http://www.thingiverse.com/thing:1514145) with some little changes.
Here is an assembly video.

I ordered all the electronic components, rods,bearings, etc on AliExpress
Linear Shafts 8mm*400mm - 2pcs - http://ali.pub/1xattp
Linear Shafts 8mm*320mm - 2pcs - http://ali.pub/1xatr6
Linear Shaft 6mm*200mm - 1pcs - http://ali.pub/1xax78
LM6UU Bearings - 2pcs - http://ali.pub/1xau1h
LM8UU Bearings - 8 pcs - http://ali.pub/1xatyr
16 Teeth 5mm Bore Timing Pulleys - 2 pcs - http://ali.pub/1xavsh
16 Teeth 3mm Bore Idler Pulleys - 1 pcs - http://ali.pub/1xawbj
No Teeth 16 3mm Bore Idler Pulleys - 4 pcs - http://ali.pub/1xawbj
GT2 Belt - 2m - http://ali.pub/1xaudq

Arduino + CNC Shield + A4988 Drivers - 1 pcs - http://ali.pub/1xaukc
Nema 17 Stepper Motors - 2 pcs - http://ali.pub/1xath9
28BYJ-48 12V Stepper Motor - 1 pcs - http://ali.pub/1xaupz
Wiring Kit - 1 pcs - http://ali.pub/1xauz4
Power Source 12V 4A - 1 pcs - http://ali.pub/1xav4r
M3 Bolts - http://ali.pub/1xasl6
M3 Nuts - http://ali.pub/1xasw2

Buy in local hardware store:
M10*400mm Threaded Rods - 2 pcs
M10 Nuts - 8 pcs
M3*8mm Bolts - 11 pcs
M3*20 Bolts - 10 pcs
M3*30 Bolts - 8 pcs
M3 Nuts - 22 pcs

Inkscape gcode output extenstion for this thing based on MakerBot Unicorn gcode Output Extension: http://rgho.st/6xLQH5WJv

• #science_technology
• #drawing
• #machine
• #axidraw
• #cnc
• #3d_printing
• #4xidraw
• #arduino
• #cnc_shield
• #grbl