Turning the Inside of a Bowl with Hurricane Carbide Tools - The Woodturning Store

The Woodturning Store
The Woodturning Store
1.7 هزار بار بازدید - 5 ماه پیش - This is the third part
This is the third part of our Hurricane Carbide Tools series. Previously, Steve attached a bowl blank onto a faceplate and turned the outside of the blank as well as a tenon. In this video, Steve shows the next steps of turning a bowl. He removes the blank from the faceplate and attaches it to the Axminster Dovetail Jaws Type A Plus. Using the Hurricane Tool Rest and the Hurricane Roughing Carbide Tool, Steve starts turning the inside, explaining the best techniques. After rough turning the inside of the bowl and reaching marked depth, Steve switches to the Hurricane Finishing Carbide Tool to smooth out the walls of the bowl. In the next video, Steve will show you how to sand the bowl.

Have you seen or tried out our NEW Hurricane Carbide Tools? If not - head on over to https://thewoodturningstore.com and check it out under the 'Woodturning Tools' category, where you will find a variety of them!

Please don't forget to LIKE AND SUBSCRIBE and please SHARE the video if you've liked what you have seen or if you found it helpful! :)

Leave a comment down below for any ideas you may have as a suggestion for a future video!
_________________________________________________________________________________________________

Timestamps:

00:00 - Introduction
01:10 - Turn Out the Wobble
04:52 - Remove Faceplate and Mount Chuck
06:31 - Drill Pilot Hole
09:01 - Rough Cut the Inside of the Bowl
15:22 - Finish Cut the Inside of the Bowl
20:00 - Outro

_________________________________________________________________________________________________

USEFUL/HELPFUL LINKS FOR THE EQUIPMENT USED IN THE VIDEO BELOW:

Hurricane Straight Tool Rests - https://www.thewoodturningstore.com/l...

Hurricane, Full-Size Carbide Tipped Rougher  - https://www.thewoodturningstore.com/h...

Hurricane, Full-Size Carbide Tipped Finisher - https://www.thewoodturningstore.com/h...

Hurricane Carbide Tools - https://www.thewoodturningstore.com/w...

Axminster, Evolution SK100, Chuck Body with 1 1/4" x 8 TPI Direct Thread - https://www.thewoodturningstore.com/a...

Axminster, Dovetail Jaws Type A Plus - https://www.thewoodturningstore.com/a...

Robust American Beauty Lathe - https://www.thewoodturningstore.com/p...

_________________________________________________________________________________________________

The Woodturning Store's YouTube Channel Background Information:

The Woodturning Store YouTube channel is dedicated to bringing you videos of tips and How-To’s for woodturning as well as product knowledge videos. Educating gives us joy and helps you with furthering your knowledge and skills of Woodturning and Woodworking as a whole. Be sure to Subscribe for more content and hit the notification button if you would like to be notified when we upload a new video! Thank you so much for watching!
Visit https://www.thewoodturningstore.com where you can find all the supplies and tools we use in our videos.

_________________________________________________________________________________________________

Find us on our Social Media Platforms:

Website — https://www.thewoodturningstore.com
Instagram — https://www.thewoodturningstore.com/I...
Facebook — https://www.thewoodturningstore.com/F...

_________________________________________________________________________________________________

Hashtags:

#hurricane
#hurricaneturningtools
#turningblanks
#woodblanks
#hurricanecarbidetools
#hurricaneturningtools
#lathes
#thewoodturningstore
#tws
#woodturning
#woodworking
#carbidetools
#robustlathes
#robustamericanbeauty
#robustamericanbeautylathe
#woodturningstore
#woodshop
#woodturningshop
#bowlblank
#bowlturning
#woodturningbowls
#carbide
#carbidecutting
#newcarbidetools
#hurricanecarbide
#newhurricanecarbidetools
#carbideset
#hurricanecarbideset
#newhurricanecarbidesets
#hurricanecarbiderougher
#carbidefinisher
#hurricanecarbidefinisher
#wooodturningtools
#woodworkingtools
#woodturningprojects
#woodworkingprojects
#craftsman
#customwoodwork
#woodturningfun
#woodworkingfun
#woodblank
#woodworkingtipsandtricks
#woodturningtipsandtricks
#woodturningtips
#woodworkingtips
#woodworkersofinstagram
#woodturnersofinstagram
#rawwoodblank
#handmade
#woodbowl
#woodenbowls
#turnedwood
#woodart
#woodcraft
#woodengifts
#handcraftedwood
#woodturningcommunity
#woodturninginspiration
#woodturningskills
#woodturningdesign
#woodturningcreations
5 ماه پیش در تاریخ 1403/01/17 منتشر شده است.
1,707 بـار بازدید شده
... بیشتر