Basic Transmitter Setup - Aura AFCS
27.8 هزار بار بازدید -
9 سال پیش
-
This gives an overview using
This gives an overview using a Spektrum DX8 as an example on how to set-up a basic transmitter model for the Aura when setting up a New Model. The same technique can be used for other transmitters.
-Reset Model
-Adjust Aileron Elevator, and Rudder Travel to 125%
-Assign a 3-position swtich to change the CH5/Gear Data
-Optionally assign a proportional Tx Control to change the CH8/Aux3 data
-Name the Model
-Set a Timer as needed
For Jeti Transmitters, see the guide here:
http://wiki.flexinnovations.com/wiki/...
Note, these videos are NOT a Manual, they are designed to expand on certain topics found in the manual.
http://www.flexinnovations.com/index....
-Reset Model
-Adjust Aileron Elevator, and Rudder Travel to 125%
-Assign a 3-position swtich to change the CH5/Gear Data
-Optionally assign a proportional Tx Control to change the CH8/Aux3 data
-Name the Model
-Set a Timer as needed
For Jeti Transmitters, see the guide here:
http://wiki.flexinnovations.com/wiki/...
Note, these videos are NOT a Manual, they are designed to expand on certain topics found in the manual.
http://www.flexinnovations.com/index....
9 سال پیش
در تاریخ 1394/08/10 منتشر شده
است.
27,891
بـار بازدید شده