SEAT SWITCH TRIM PANEL REPLACEMENT - Dodge Grand Caravan (08 - 20) & Chrysler Town Country (08-16)
26 هزار بار بازدید -
2 سال پیش
-
Step-by-step guide on how to
Step-by-step guide on how to replace / install driver side seat track cover on Dodge Grand Caravan and Chrysler Town & Country minivan ( 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | SE | CVP | AMP | SXT | LIMITED | CREW | VALUE PACKAGE | EXPRESS ).
Driver's seat trim cover almost always cracks and falls down on these Dodge and Chrysler minivans. It is just a bad design and it is unavoidable. There is a plastic hook which holds onto a metal bracket and with time how people get in and out of the vehicle that hook cracks. Then the seat switch panel is not firm anymore and in place which results in all other clips which are holding it in place to crack.
So this video shows how you can install brand new seat track side cover on Grand Caravan and Town & Country. You can buy an aftermarket cover which is not too expensive and it is really quite easy to install.
First you will need to remove the bottom part of the seatbelt because it has to go through the opening on the seat switch panel. Pull it through and install the seatbelt back onto the seat. Then hook up the front hook and press the middle clip of the cover into into the small opening on the seat itself. Now install small screws which holds the back part of the cover. In the end push the small plastic trim screw through the opening at the bottom part of the seat trim panel. In the video I am showing and explaining everything in details.
Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!
⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Driver's seat trim cover almost always cracks and falls down on these Dodge and Chrysler minivans. It is just a bad design and it is unavoidable. There is a plastic hook which holds onto a metal bracket and with time how people get in and out of the vehicle that hook cracks. Then the seat switch panel is not firm anymore and in place which results in all other clips which are holding it in place to crack.
So this video shows how you can install brand new seat track side cover on Grand Caravan and Town & Country. You can buy an aftermarket cover which is not too expensive and it is really quite easy to install.
First you will need to remove the bottom part of the seatbelt because it has to go through the opening on the seat switch panel. Pull it through and install the seatbelt back onto the seat. Then hook up the front hook and press the middle clip of the cover into into the small opening on the seat itself. Now install small screws which holds the back part of the cover. In the end push the small plastic trim screw through the opening at the bottom part of the seat trim panel. In the video I am showing and explaining everything in details.
Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!
⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1401/02/17 منتشر شده
است.
26,004
بـار بازدید شده