How to mask FAST ! Spray Painting Trim

XC Painter
XC Painter
26.8 هزار بار بازدید - 6 سال پیش - This is how I have
This is how I have been running my masking paper on some jobs lately in order to mask off the walls.
This masking is done so we can spray paint all the MDF trim in this entire house. We apply two coats of paint so the masking is worth the small amount of time invested

My boss doesn't mind us using blue tape to run a perimeter around all the trim first. That makes running the masking paper fast and easy for the entire house.

I'm using 12" brown masking paper (Trimaco) and 1.5" pg5 tape by Intertape.
Make five or six in folds and secure them to the wall with your masking tape to stop the overspray from hitting the wall.

*** Safety disclaimer.:
Where and or use all safety equipment necessary on your renovation project. Personal protective equipment are things like respirators, hearing protection, work boots, eye protection, hi-vis clothing, and harness, ropes (roof work) and more when applicable.

XC painter shall not be held for any injury or incident that occurred I'm anybody else's job site. Health and safety is the responsibility of each and every person on a job site, and they must look out for their co-workers and peers as well.
Please read and understand all instructions for all the equipment or tools. Do not use spray equipment or ladders or tools if you do not fully understand their use and risk of injury.

Thank you so much for watching the video everyone and for reading the description!!!
I Appreciate your support.

HAPPY PAINTING!
6 سال پیش در تاریخ 1397/10/25 منتشر شده است.
26,800 بـار بازدید شده
... بیشتر