How to wire a Mini DIN Pressure Transducer

Hey everyone, in this video we're going to show you how to wire a mini-DIN Pressure transducer.

Steps:

Disconnect the din plug using a screwdriver
Pop open the slot with a flat head screwdriver
Take it out so you see the terminal block, look at the calibrations underneath.
Take both wires and but them both through the DIN.
Connect red and block to the terminal block
Once connected assemble the block back together into the cap so it pops into place
Align slots on the body when putting this back onto the body of the transducer

Learn more about Pressure Transducers here: https://www.omega.com/en-us/resources...

Shop Omega for Pressure Transducers here: https://www.omega.com/en-us/sensors-a...

• #howto_style
• #engineering
• #omega
• #how_to
• #how_to_wire
• #pressure_transmitter
• #pressure_sensor
• #pressure_transducer
• #how_to_wire_a_transducer
• #how_to_set_up_a_transducer
• #how_to_set_up_a_pressure_transducer
• #how_to_wire_a_pressure_transducer
• #3_wire
• #connect_wires_to_a_pressure_transducer
• #pressure
• #transducer