Introducing the MTD 630 Short Scale Bass!!! Just Bass It

Just Bass It
Just Bass It
25.7 هزار بار بازدید - 7 سال پیش - Michael and Daniel's objective in
Michael and Daniel's objective in creating the 630 was to make a travel size cousin to the 635 that still packs the same low-end, playability and craftsmanship associated with MTD. They started this build with the concerns of our touring customers in mind and designed a bass that would fit in a smaller sized gig bag making it easier to stow when traveling. Through the specifics of the MTD design and the help of LaBella strings they were able to keep the response of the low b as close to what you would hear from their other basses. The 630 is available to be built with any of the fine tone woods that they use in all of their other basses.

Spec's of the bass:
-6 string B-C .120, .100, .80, .60, .40, .30
-Standards 24 fret
-17mm spacing
-Poplar body
-Maple neck (MTD asymmetrical neck carve)
-Birdseye maple fingerboard
-Matching front and back peg head veneer
-Standards MTD logo
-Hipshop black hardware
-LaBelle strings produced for MTD
-Bartolini proprietary MTD pickups and 3 band pre amp

If you have any other questions please leave them in the comment section below or check out www.mtdbass.com!!

Check out www.labella.com to order an array of fine strings, www.ampeg.com for the baddest amps on the planet and www.tsunamicables.com to elevate your tone!!

JUST BASS IT!!!!
7 سال پیش در تاریخ 1396/02/19 منتشر شده است.
25,785 بـار بازدید شده
... بیشتر