How to capture a wheel speed sensor waveform using a PicoScope #1219
8.5 هزار بار بازدید -
7 سال پیش
-
Probably the last video in
Probably the last video in this series (well for a while at least), covering how to connect & set up a PicoScope Oscilloscope to capture a signal waveform from a wheel speed sensor.
This would be applicable if you had problems with your speedo working or ABS, Traction control etc systems if fitted. Wheel speed sensors can & do give problems, and having the ability to actually 'see' the signal generated can go a long way to diagnosing the fault.
If you are looking to purchase one of these PicoScope units then here's a link to the NZ importer:
www.metermaster.co.nz
I will of course be using the PicoScope on future videos and & when required so keep your eye out!
Andy Mechanic
This would be applicable if you had problems with your speedo working or ABS, Traction control etc systems if fitted. Wheel speed sensors can & do give problems, and having the ability to actually 'see' the signal generated can go a long way to diagnosing the fault.
If you are looking to purchase one of these PicoScope units then here's a link to the NZ importer:
www.metermaster.co.nz
I will of course be using the PicoScope on future videos and & when required so keep your eye out!
Andy Mechanic
7 سال پیش
در تاریخ 1396/08/06 منتشر شده
است.
8,584
بـار بازدید شده