No start troubleshooting (fuel pressure, injector pulse, spark) - GM OBDI

ScannerDanner
ScannerDanner
226.5 هزار بار بازدید - 9 سال پیش - In this video I will
In this video I will show you how to test for spark on a GM type two waste spark system. How to test for proper fuel injector control and how to test fuel pressure and the fuel pump electrical system.
Finally I will show you how to get trouble codes from an OBDI GM with no scan tool.

Engine Performance Diagnostics chapter 15 page 6 chapter 16 pages 9-13 chapter 18 pages 9-17

Symptoms
 - no start
 - start/stall
 - poor performance when it would start
 - low power
 - ran better with the MAF sensor unplugged

Fix
 - replace faulty fuel pump

Tests shown
 - how to test for spark
 - how to test for shorted injectors using a scope
 - how get trouble codes manually by jumping the data link connector (flash codes)
 - how to test the fuel pump electrical system from under the hood

Tools used
 - Picoscope
 - inductive low amp probe

Playlist
 - (Chapters 14, 15,16) Fuel Delivery and Fuel Pressure Testing
(Chapters 14, 15,16) Fuel Delivery an...

Related videos
 - Rough idle, false MAP codes intermittent no start (shorted injectors) GM  Rough idle, MAP code 33,  intermitten...
 - How to test for shorted fuel injectors (1987-1994 GM Cars)
How to test for shorted fuel injector...
 - How to test fuel pressure, injector pulse and spark with basic tools How to test fuel pressure, injector p...
 - Fuel Pump Electrical Circuits Description and Operation
Fuel Pump Electrical Circuits Descrip...

For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium https://www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!

Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.
9 سال پیش در تاریخ 1394/12/16 منتشر شده است.
226,566 بـار بازدید شده
... بیشتر